Board Logo

Pre ebay sale - type 4 Additional oil cooler plumbing parts - Price REDUCTION
bus914 - July 26th, 2008 at 10:32 PM

USA made Type 4 oil filter relocation parts, (plumbing for extra cooling), unused, together $50

Complete type 3 motor - cond unknown - EOI

Weber tech manual as new $20

Bus air distributor with Idle speed control, TB and pressure reg $50
Bus runners and injector rails $10


bus914 - July 26th, 2008 at 10:41 PM

.


bond - July 27th, 2008 at 11:09 AM

Type 3 or 4 IDF linkage - new - $100

is tihs just a hex bar style?

nick


bus914 - July 27th, 2008 at 11:49 AM

yes, hex bar


donn - July 27th, 2008 at 12:37 PM

Tell me about the electronic ignition, easy install? what are the benefits etc.......Thanks, Don


bus914 - July 27th, 2008 at 02:48 PM

The box promises easier starting, improved performance and fuel eco. While all this may be true, I installed one (in the bus) so long ago that I can't remember how it was before. But the best thing is that you never need to adjust your points, and you will never get points bounce at any revs. Its already installed in the 034 dizzy shown above, both brand new never used.


bus914 - July 28th, 2008 at 08:43 AM

Sale pending on linkage, manifolds and dizzy.


bus914 - August 5th, 2008 at 01:16 PM

Price reduced on the rockers:rolleyes:


Joel - August 5th, 2008 at 06:27 PM

PM sent :tu:


General_Failure - August 5th, 2008 at 07:08 PM

PM sent mate!


bus914 - August 5th, 2008 at 08:37 PM

Sale pending on Rockers and Centremount carby setup. I've replied to all PM's


bus914 - August 8th, 2008 at 09:56 PM

new stuff


type3disease - August 8th, 2008 at 11:23 PM

PM sent


eraser - August 8th, 2008 at 11:24 PM

Bus centremount progressive carb with manifold, thats just a dual port type 1 carbi and mamafold? as in it would work in a beetle mmotor? If so if it hasnt been taken i will grab it.


splitbus07 - August 10th, 2008 at 10:54 PM

PM send :borg:


bus914 - August 11th, 2008 at 01:15 PM

Sale pending on Weber Tech manual and extension


Adsman - August 11th, 2008 at 03:00 PM

PM sent


splitbus07 - August 11th, 2008 at 04:32 PM

consider the tech manual sold!


sinecure - August 11th, 2008 at 05:03 PM

Second dibs extension please!


bus914 - September 22nd, 2008 at 12:50 PM

USA made, Oil filter relocation parts, allows addition of an extra oil cooler without modifiying the case.:spin:


Hutcho - September 22nd, 2008 at 02:32 PM

PMed mate.:cool:


bus914 - October 6th, 2008 at 09:58 AM

Also have a complete type 3 motor


bus914 - October 8th, 2008 at 06:27 PM

Price reduced on oil filter reloc parts