Board Logo

Vic - Bits and pieces
3toes - September 27th, 2008 at 01:33 PM

I have a 4 tab bonnet that seems to be in good shape, surface rust and a couple of splits starting on the lower front lip (by the lock). Bought it for my 58 but found a better one - $140

Type 3 front screen rubber. Brand new West Coast Metric $50.

Splitty front screens (s/hand) $ FREE

Splitty Front badge $50
s/h semaphores. good working order. 1 lens has a small hairline crack near the vw symbol. $180 (much less than they cost me).

type 3 push button dash. 1 button missing. was working when removed from the car.

Ambulance light. Connects to a hinge pin type thread. Back of the light is a polished convex shape to act like a mirror. Dimmer wheel on the side made by Hella. $150

Type 3 parcel shelf. NOS mesh type. never fitted. $200 (which is less than the price it cost to get it shipped to Aus.)

Contact Chris on 03 9754 6583. Parts are in Belgrave East of Melbourne. I can send pics via mobile if required.

BUGBOY - September 27th, 2008 at 03:02 PM

interested in the seats can you email me some pictures

Nathan

3toes - September 27th, 2008 at 06:00 PM

I think you might have nisread SCREENS Nath'. The only seats I've got are in front of my tv.

Gibbo - September 27th, 2008 at 06:36 PM

Chris, Will the front screen rubber fit an early notch and does it have the moulding groove?
Oh and would you post to Brissy?

Cheers

3toes - September 28th, 2008 at 03:02 PM

It's a trimless rubber. Fits all type 3's from 62 on and I'll post it anywhere if you pay the postage. Let me know if you are interested.

Cheers
Chris

vwtyp2 - September 29th, 2008 at 02:17 PM

interested in the 4 tab bonnet if it has the triangle plate under the 4 tab section.

3toes - September 30th, 2008 at 03:29 PM

I'll check that out and get back to you.

Chris

3toes - October 9th, 2008 at 06:00 PM

No triangle plate on the bonnet vwtype2.

New items added above

3toes - October 14th, 2008 at 11:41 AM

bump.

volumex - October 21st, 2008 at 06:33 PM

What is the part number and date code on the semaphores?

Split Rat - October 21st, 2008 at 08:02 PM

3Toes, If you still have it, what colour is the split badge,is it original paint still and does it have all its pins still fitted.? Do you have a pic of the ambo light ?

Cheers Greg

VW-VARIANT-L - October 22nd, 2008 at 01:44 PM

Also interested in the ambulance light, cheers.

3toes - November 3rd, 2008 at 08:17 AM

Hi Volumex,

part number on the semaphores is 111 953 021C. I can't see a date anywhere on them

3toes - November 3rd, 2008 at 08:20 AM

The splitty badge looks like the original paint but most has been rubber off. The 4 pins are still on the back. I bought it to chrome it so it's straight.

I'll sort out pics of the light later today if I can.

Cheers
Chris

waltermitty - November 3rd, 2008 at 12:35 PM

Chris you have Pm. Mitchell

3toes - November 4th, 2008 at 10:37 AM

you have email mitchell

CAFFINEPUSHERMAN - November 4th, 2008 at 12:12 PM

check your phone messages