Board Logo

WTD Beetle steering colum clapsable type
subisupa - November 18th, 2008 at 12:28 PM

As title states I need one can ship from anywhere.

Let me know
thanks

vwperformance - November 18th, 2008 at 01:36 PM

Hi ,Do you know what length it is.Let me know and I'll see what I can do.
Peter

LUFTMEISTER - November 18th, 2008 at 05:02 PM

where r u ?

subisupa - November 19th, 2008 at 02:02 PM

Rockhampton QLD

Length not sure did not know they were different, stil have to make mounts so anything beetleish would probably do I have a early non colapsable one in there now so something around that size.

Cheers

vwsteve - November 20th, 2008 at 06:06 AM

i think i have 1 off a superbug, complete steering wheel to base, will check

68AutoBug - November 20th, 2008 at 01:33 PM

I'm not sure about SUPERS fitting a torsion bar beetle...

1968 - 1974 torsion bar NON supers should all be the same

I know the 1976 Non Super had smaller splines for the steering wheel... [Golf size]

So, it would be simple to use one from these years...

All Super beetles used universal joints to go to the steering box [as far as I can remember]
where the NON supers it was a straight collapsable shaft from the steering wheel to about 50-75mm away from the steering box shaft.. to the flexible coupling ..

Lee

vwperformance - November 20th, 2008 at 02:13 PM

Hi Got one here from a73 Beetle,$45 plus freight.
Give me a call on 02 43257911 during business hours if you are interested.
Peter

subisupa - November 21st, 2008 at 01:36 PM

Will call next week thanks