Board Logo

BNE f/s twin 40 webers, 1600 box, T4 upright kit, pre '55 fuel tank
cram - January 6th, 2009 at 07:35 PM

Hi all,

Pair of 40mm IDF webers with manifold, air filter, and linkage to suit a type 4. The manifolds have been modified to fit 914 heads but easy to redrill studs for kombi head. The carbs were rebuilt with CB update kit ( http://www.cbperformance.com/catalog.asp?ProductID=508 ) but has some original vents. Have been sitting in the box for a while otherwise vgc. Asking $800 + postage if required.

1600 kombi box - unsure of condition - came with a buggy chassis I purchased $100. Pick-up only

sharpbuilt T4 upright kit for T1 fan - used cylinder covers (could use a paint), new pulleys, dip stick tube etc. no tin ware. SOLD

pre 55 fuel tank (T1 or early T2?) - good condition with some surface rust. Has big cap. $150 (pick-up only)

Be quick - going up on e-bay shortly.

pick-up from Inala (Brisbane)
Marc
0408 777 400.


vwsteve - January 7th, 2009 at 06:22 AM

pm sent


cram - January 7th, 2009 at 09:02 PM

Thanks all for you interest.
The Type 4 kit comes with:
- 6 piece fibreglass kit (used)
- pully (new)
- fuel pump blockoff (new)
- alternator/generator stand (used)
- dipstick holder (new)
- oil cooler adaptor

you'll need oil lines and a shroud, fan and alternator for a baja or buggy
if going into a beetle or early kombi - you'll also need tinware.

my cameras not downloading atm - will get in sorted sooner rather than later hopefully.


bond - January 7th, 2009 at 09:57 PM

is the type 4 kit andrew's old purple one?


cram - January 8th, 2009 at 05:32 PM

Quote:
Originally posted by bond
is the type 4 kit andrew's old purple one?


nope - its red - so it must go faster!


cram - January 13th, 2009 at 03:41 PM

T4 kit sold
carbs sold (pending payment)

keep on eye on e-bay for the rest and more!
cheers
marc


cram - January 17th, 2009 at 11:27 AM

carbs still for sale
- Italian 40 IDFs
- 'short' type 4 manifolds for kombi
- push-pull linkage
- CB update kit installed
- comes with original vents and jets
- outer holes filled and widened to suit 914 heads (see pic) - need to be drilled out for kombi or if you are a bit handy then fill and redrill for cleaner finish.


cram - January 17th, 2009 at 11:30 AM

one more!

And the tank...


volumex - January 18th, 2009 at 12:05 PM

PM sent (or about to be) re tank


nils - February 4th, 2009 at 06:48 PM

don't suppose you still have the g'box?


cram - February 4th, 2009 at 08:52 PM

sorry nils - sold it with a complete pan.