I Stripped an 1835 engine that has been left out in the weather for a few years.

Parts free to good cause or someone in need of them.

Pick up in Belmore, Sydney near Vintage Vee Dub supplies.

Salvageable parts are:

4 X Mahle 91.99mm pistons & rings complete look like they are close to brand new with all OG markings still legible, including blue and red paint on oil control rings.

3 X Mahle 91.99 ID Cylinders with OG hone marks still visible on bores (1 X ROOTED Cylinder quite rusty )

1 X Shadek Oil pump modified for full flow

1 X Gene Berg full flow Oil pump cover (been welded)

1 X STD VW 69mm Crank complete with cam & Dizzy gears (used)

4 X STD VW con rods (Used)

8 X STD VW lifters (used)

1 X Cam shaft of unknown specs with removable 3 bolt cam gear

8 X STD VW push rods (used)

2 X STD VW rocker shafts complete with shims, clips & rockers (a little surface rust)

2 X STD VW twin-port cylinder heads (inlet ports corroded from exposure to weather)

1 X rusty 009 dizzy (shaft still turns freely, might clean up ok)


Case no good not included & no tin-ware or any thing else

PM me if you need anything or everything on the list, pick up only.

Wayne.

pm sent

Replied to baywindowbandit.

Parts are going to new home.

Wayne.