Anyone in sydney have a tuck away exhaust with the 3 bolt flange. Tried Vintage VW but they are all out, it doesn't need to be new just in good nick. Its going to replace this:

Classic is having a sale on stainless exhausts....

Hi

Go and see Westi at Padstow.

Steve

Westi will cost me $500 for a stainless one, was hoping for a mild steel to keep the costs down. Are Classic any good?

Hi,

I have a bugpack hideaway I ran on my car for a couple of hours. It is HPC coated, but at the moment the flange is cut off (went to a Fatboy and the flange was hard to source). But I have a brand new replacement flange that can be welded on (bought that after going the fatboy route). You would need to weld the flange again, or get an exhaust shop to do it. I would offer to weld it, but at the moment I have no bug with an engine it it, so wouldn't be able to align it to do the weld.

Let me know it you're interested. Looking for about $50. I am in BNE, so you'd have to factor postage which through my work's carrier (Toll Ipec) which maybe $30 or so (I recently sent a framehead to Syd for $34 which would have similar cubic).

Cheers
Peter

P.S. BTW I am only talking the muffler. On re-reading I guess you might be after the complete exhaust.