Board Logo

Beetle IRS pivot bolts n gearbox cradle
psimitar - July 27th, 2009 at 07:24 PM

Hello all,

Doing an IRS conversion and require a pair of IRS pivot bolts for the diagonal arms and the 4 thick washers too.
Also, need a gearbox cradle and the two huge bolts for the end of the frame horns.

Can anyone help me out?

Thanks,
Mike


Brad - July 28th, 2009 at 09:54 AM

With the pivot box's I would buy them off Custom Vee Dub, they have new heavy duty ones in stock that will fit and work well. ( http://www.customveedub.com.au/store/index.php?act=viewProd&productId=22 ) it will make your life much easier.


http://www.customveedub.com.au/store/images/uploads/36.jpg


psimitar - July 28th, 2009 at 06:35 PM

Quote:
Originally posted by Brad
With the pivot box's I would buy them off Custom Vee Dub, they have new heavy duty ones in stock that will fit and work well. ( http://www.customveedub.com.au/store/index.php?act=viewProd&productId=22 ) it will make your life much easier.


http://www.customveedub.com.au/store/images/uploads/36.jpg


Thanks dude. Already got the brackets I just need the pivot bolts so I can align the bracket properly :)


bushed - July 29th, 2009 at 01:05 PM

ure close to Micks mtr
go gettem
I may have bolts for horn but see Mick first


psimitar - July 30th, 2009 at 06:53 PM

Quote:
Originally posted by bushed
ure close to Micks mtr
go gettem
I may have bolts for horn but see Mick first


Yea foned Mick before I posted this. No luck and he couldn't think where to get em. luckily VW Performance in Gosford sent a PM so $65 later and all is good. well gotta wait for Oz post to do it's thing :)