I'm urgently after some parts for my buggy..... it runs a VW beetle front end, torsion bar setup, and Kombi drivetrain (hooked onto a 2.6L sigma)....

It's a 20ish year old frame buggy, and I took it for its first drive since I bought it to rebuild, and now urgently need some parts to rebuild (now that I know what needs to be done ). Basically, after some beetle front end parts, to rebuild.. Ideally an entire front suspension/brake setup (inc torsion bars etc), and Kombi gearbox/diff/axles etc....
will pay cash

The gearbox is the most important thing I need ASAP.

Please PM me if you have anything, even if you think it is only good for scrap
Cheers

bump

still after parts... need them ASAP.. please let me know if you have anything

PM sent

ball joint or link pin front end?

Early or late kombi gearbox? Reduction hub gearbox perhaps?

I have a 63 splitty box with reduction boxes in the shed here in Adelaide

PM sent - I'm in Belair (forgot to add that to the message)

Kimbo

grumble, it is currently set up with link pin, cheers

lohoon, not really sure what the difference is between early/late boxes. Sorry, I'm new to VW...only bought it recently, stell trying to work out what is what.....
I've been told I probably need a 1800 or 2L box though....Also, what is reduction hub box? :P

thanks

square...any idea whetehr that is 1600, 1800, or 2L?

Kimbo, will get back to you as soon as I have 5 posts (apparently you cant PM until then! :P

thanks

No probs - all it said was I've got a 1600 kombi box with a 2ltr bell housing sitting in the shed. I've not used it myself as it came as a spare with my race buggy, and I've already got another race spare - so it's just collecting dust at present - if you're interested I'm open to offers.

Kimbo