Board Logo

WTB: NOS 82mm Berg or Okrasa Crank
jl_1303 - September 2nd, 2009 at 10:27 AM

As titled.
Please reply to jeremy_hk@hotmail.com


vw54 - September 2nd, 2009 at 11:47 AM

where u located at ??? might help


dangerous - September 2nd, 2009 at 01:21 PM

...also what journals?
Most berg and okrasa 82s had porsche rod journals,
which is nice if you have, or can get the rods and bearings.
....but you could also get berg cranks with ALL type 4 main size.(most had just the centre at 60mm).


jl_1303 - September 2nd, 2009 at 01:46 PM

The crank will need to be shipped to California in the States.
Porsche journals will do fine.


Bizarre - September 2nd, 2009 at 03:56 PM

Quote:
Originally posted by jl_1303
The crank will need to be shipped to California in the States.
Porsche journals will do fine.


I'm confused

Why by from Australia and ship back to California

Why not buy off Berg in California???


vw54 - September 2nd, 2009 at 06:16 PM

Jeremy

U wont get a Okrasa here maybe a Berg


grogy - September 2nd, 2009 at 07:08 PM

i used to have a78.4 okrassa here, was good crank but the dowells are smaller and shorter than scat or cb , mine stripped out and had to be replaced,crank needed redrilling. i used scat ones


jl_1303 - September 3rd, 2009 at 02:35 AM

Rang Berg the other day and was told that their cranks are sold out.


vw54 - September 3rd, 2009 at 06:56 AM

What about Demello or Scat must be some on the Samba 4 sales