Board Logo

wtb type 1 engine
hobbit - November 13th, 2009 at 06:50 PM

wanted, type 1 engine. Any conditions fine. To be a project re-build. Somewhere near Brisbane or sunny coast would be good.

Cheers..

grumble - November 13th, 2009 at 07:19 PM

How complete do you need.ie bare long block,complete with all ancilliaries 6 or 12 volt? I have a couple laying about that need a line bore etc.

hobbit - November 13th, 2009 at 08:46 PM

12 v if possable. i'll take whatever you've got, starter & dissy would be good. not to worried about cylinder bore condition as its getting a new pistol and bore kit.
Thanks

bushed - November 14th, 2009 at 08:51 AM

so its gunna bee a 6 shooter ?? lol (pistol kit)

I have part dismantled one here

needs gaskets and a clean
12 volt genny 1600 sp and $300 with muffler and nice heater boxes.
am close by...

bushed - November 14th, 2009 at 08:53 AM

needed a valve repl
done now
04212 86423

hobbit - November 16th, 2009 at 05:37 PM

Howdy partner, yeah ha. :smilegrin:

bushed, I'll have to let you now. Waiting to hear about one through a mate.

Cheers though.

bushed - November 17th, 2009 at 10:53 AM

easy pick up
check piston play etc and heads while off.
prob have some gaskets to throw in

66deluxe - November 19th, 2009 at 09:14 AM

i got a 1600 twin port complete that you can have for $350 im in north brisbane.

Damo.

~air fooled~ - November 19th, 2009 at 01:05 PM

u2u send 66deluxe- ill take it