Board Logo

Type 3 parts wanted
67panel - February 15th, 2010 at 04:50 PM

I need two parts:
I am looking for the removable panel that attaches under the spare wheel
also looking for the locking mechanism for the front bonnet (the part attached to the bonnet not the body).
It's a 63 notch - incase they changed over the years.

The bonnet wouldn't open so there was a need to drill into the lower panel (to access the screws inside!).


Klaus - February 15th, 2010 at 07:08 PM

where are you i have these bits.


67panel - February 16th, 2010 at 07:05 AM

Adelaide


electricmonk - February 16th, 2010 at 02:32 PM

I have the parts from a 72, not sure if they will fit but may be worth a try if you want.


Klaus - February 16th, 2010 at 03:21 PM

72 are different up to 69 are the same .
I could post them out but might get expensive as spare wheel well is big.


67panel - February 16th, 2010 at 07:35 PM

Klaus I have sent you a pm, thanks