Seller - Angus
Wynnum/Manly Qld, 4178
Item Description - see below
Condition – NOS
Item Cost - see below
Contact here or 0412 105 789
Some left over bits no longer required, all NOS;
25/36 HP Karl Schmidt main bearings, U4. 2 sets $30 ea or $50 for both
25/36 HP Karl Scmidt big-ends $25 ea or $40 for both sets
25/36 HP tappet covers - $30 pair
GHE accessory under-dash ashtray, see photos. Was going to fit to my ghia but have changed my mind - $100
Bearings sold pending, ashtray and tappet covers still available. Offers?
how different to a beetle is the tray
or will it fit a beetle pls Angus, any pic ?
bernie
Bernie
the (bad) photos above are of the ashtray. I'll try to take some better ones. I don't see why it shouldn't fit a beetle, those four holes you see
from the top are for the monting screws. You just need a flat section underdash to mount it. Size is 100mm wide x 120mm deep x height 30mm. The
actual chrome front is about 40mm high, it has a handle to pull out the tray.
I'll try it out in my '67 beetle in daylight.
Angus
Bernie
Here is another photo. I tried it in my '67 beetle, and it can be fitted under the glovebox, but it pokes out a few mm. OK but it fits under a
ghia dash better.
oh dear; I read 'under dash tray' !!!
sorry man but someone will see it now and hopefully buy it.
Bernie
You should always read the fine print.......