Board Logo

WTB Double flange j pipes
mczaf666 - April 8th, 2010 at 07:08 AM

Hi all,

Has anyone got any J pipes with exhaust flanges both ends that are not needed anymore. The extractor set up requires flange at head and to connect to system at other end.

Thanks in advance

Hamish


Bizarre - April 8th, 2010 at 07:23 AM

Dont believe you can buy then that way

I have flanges on my exhaust set ups but you buy/cut flanges and weld them on

You have to kake sure they align to the header


mczaf666 - April 8th, 2010 at 12:06 PM

Thanks Mate,

I thought I may have to do this....I have seen them manufactured like this though but may be hard to find.

Thanks again

Hamish