Board Logo

wtb: 050 BOSCH dizzy cap.
lohoon - July 8th, 2010 at 08:38 PM

WANTED TO BUY... A NEW DIZZY CAP & ROTOR

Does anyone have one of these preferably new?

cheers

SCOTT..

Muswellbrook 2333 NSW

PM..


Hi
these were used in 4 cylinder Porsche 912 cars

The cap is higher than a 009...
the rotor is larger..
the cap has two lugs that bolts could be screwed thru..?
like on caps that don't have clips... but screws

and it has a "u" shaped slot in the top of the dizzy rim for the points wire to go thru... the cap holds this rubber connector in place..

I've never seen anything like it... lol

LEE

bugzla - July 8th, 2010 at 09:18 PM

009 cap

lohoon - July 9th, 2010 at 05:16 PM

Was that a guess?
bump.. anyone.?

66deluxe - July 9th, 2010 at 08:06 PM

I need one too found this http://www.aircooled.net/new-bin/viewproductdetail.php?keyword2=IGR0001&c...

Damo.

bugzla - July 9th, 2010 at 08:17 PM

ive got a 010 with a 009 high cap

Dyno - July 9th, 2010 at 09:15 PM

GB72, should be the same as 36 horse dizzy cap. Are they not available any more?

68AutoBug - July 9th, 2010 at 11:44 PM

Quote:
Originally posted by 66deluxe
I need one too found this http://www.aircooled.net/new-bin/viewproductdetail.php?keyword2=IGR0001&c...

Damo.


I bought a New SVDA Bosch distributor from these people..

Can a 009 cap be made to fit a 050 or 010??

LEE

bugzla - July 10th, 2010 at 02:06 AM

mine fits perfect i cant see any changes with mine other then the chrome body and dual springs on the inside

dangerous - July 10th, 2010 at 07:56 AM

they have a notch on the side to clear the points/condensor screw.
any bosch supplier will get one for you if they are still available.

68AutoBug - July 10th, 2010 at 11:21 AM

Quote:
Originally posted by dangerous
they have a notch on the side to clear the points/condensor screw.
any bosch supplier will get one for you if they are still available.


Yes
My Son mentioned that to Me...

LEE