Board Logo

WTB: Type 1 Rear axle bearing seal runner.
Anthiron - July 11th, 2010 at 06:00 PM

I am chasing a bearing seal runner for a type one rear axle.

it is the spacer with the chamfered edge to trap the small o ring that goes in between the drum and the bearing.

Needs to have a nice smooth inside mating surface to seal on the bearing seal.

Cheers
Nicko
Sunshine Coast
0439737762

vw54 - July 11th, 2010 at 06:10 PM

so was it missing and making yr axle loose ????

matberry - July 11th, 2010 at 06:21 PM

His was crusty on the OUTSIDE where the axle lip seal seals :smilegrin:.

Anthiron - July 12th, 2010 at 04:47 AM

and now i owe matt one :P

hellbugged - July 12th, 2010 at 07:13 AM

Quote:
Originally posted by Anthiron
and now i owe matt one :P


so do you need it straight away Matt?

just pick one up from here when you come down, plenty around, everybody is happy.

no probs

matberry - July 12th, 2010 at 11:14 PM

That'll be fine Daimo...all good.

Anthiron - July 12th, 2010 at 11:17 PM

Thanks Daimo.

hellbugged - July 13th, 2010 at 07:50 AM

oh and Matt, had the roundtoit out yesterday before i put the anti shoker back in :tu:.....

matberry - July 13th, 2010 at 11:40 AM

Daimo, please please please send it up when your finished, been looking everywhere for one.