I'm about to fit up my Subby 2.5lt engine in my 58 split and getting everything together.

Not sure if anyone has anything about, I have the motor/adaptor plate but chasing the rest of the gear, radiator, thermos, cover etc etc.

My number is 0412 848 579 or reply.

Thanks

what cover ?

and what is ect ect ?

i know what a thermos is, but mines got no lid.

E-bay mate.

All Things Subaroo
Shed 10
34 Paisley Drv
Lawnton 4501

ask jason what he's got should be able to help you out
ive got all my stuff for fair prices too

yay for skippy ( ! )

I've got a thermos I could spare.

hth

Thanks fellas,

Seagull, I'm not sure what ect ect is but what I meant by etc was the rest of the gear that I would need to complete this conversion.

I have never gone down this path before but I rang customveedub and they have a cover or scoop that goes over the radiator to scoop the air in underneath. that sits between the chasis rails and also the crossmember

Apparently I need to get my loom modified as well as the sump.

They just seemed very pricey for what I would be getting so was seeing if there was other places or if anyone had something.

Otherwise I guess I will hunt the wreckers and make the things up ourselves .....

Any help appreciated.

http://www.volksconversions.com.au/ 

we did it on the cheap, no fancey sumps etc.
did our wires at home on the shed floor.

got the water pipes made up at the exhaust place, out of exhaust pipe.and
a small radiator made to fit.
fuel pipes from a brake shop.
fuel pump Holden camira / vl commodore
old 20L plastic drum cut up to make air scoops

Sump can be easily modded your self if you have a grinder and welder.

wiring loom stripping just requires a Haynes manual or some other way to get the wiring diagram plus a little help from on here as to the none engine sensors required to make the ECU work.

Thanks heaps for the help, I'm onto it.

It all starts tomorrow.