Board Logo

(FS or swap) MagnasparkII distributor and wires
alien8 - October 2nd, 2010 at 04:59 PM

I just purchased a new CB Magnaspark II distributor (coil model)and wires from the States. Product details can be seen here
http://www.cbperformance.com/catalog.asp?ProductID=432

I did not relise untill after it was shipped that it can not be used with a stock fuel pump, silly me for not reading the big bold print :blush:. I am not keen to install a electric fuel pump so my loss is your gain. I will eat the shipping from the US and include free shipping within Australia.
$180 firm, which includes the Magnaspark wires and the distributor.

I would consider a swap for a good clean Bosch 019.
Part no. 0 231 129 019

Brad
Brisbane 4207
(07) 33861341
0433465240
or PM

Cheers.

Craig Torrens - October 2nd, 2010 at 05:39 PM

I assume you mean 009 ?

alien8 - October 2nd, 2010 at 05:50 PM

Nope I am after a 019. Bosch also packaged it as the Blue Screamer.
I'd have rocks in my head if I was looking to swap a Magnaspark for a 009.
I was going to set the magnaspark to a similar curve as a 019 or 010, but yeah the pump issue.

Craig Torrens - October 2nd, 2010 at 05:52 PM

yeah thats what i was going to say !!!

alien8 - October 2nd, 2010 at 06:15 PM

Sold. Pending

bugzla - October 3rd, 2010 at 12:04 PM

got a good 019 and 010

DannyW - October 7th, 2010 at 03:33 PM

if its a non payer I will take it