Ok

Have been having a look through all my personal gathered parts over the years and have sorted out what i need to keep for my rides and what mabey of some use to someone else .
Please note that these items are ALL my personal stock so do not ring CVD as they will not be able to help you

Item 1
Late Kombi trip speedo , has one light scratch on the face near the lower trip area , and does not have a rest pin for the needle but all works fine including the odometre and trip
SOLD & GONE

Item 2
Set of 4 early beetle beauty rims to suit stock 15 X 4 wide 5 rims , these are not perfect by any means but would clean up ok with a polish
$40

Item 3
Manx or any buggy stainless steel stereo mounting box
This was made by myself many moons ago and is in a brushed stainless finish and is fully tig welded and a nice neat way of mounting the stereo in a buggy
$ 30

Item 4
Chrome fan belt cover to suit a type 1 engine in a buggy or baja etc , has brackets etc
$ 15

Item 5
6 volt headlight globes , i have two sets of these , and in a recent search for these for CVD it was found they are all but impossible to find new ones
$10 each globe

Item 6
Set of Suparax heavy duty roof racks to suit a kombi
$50

Item 7
Late bay front bumper
This is a nice straight bar which has been sandblasted a while back and some light surface rust but is not pitted and has been stored in a dry area
$60

Item 8
Pair of IRS beetle Monroe rear shockies , i believe these where only ever fitted to a car for mock up but never driven on
$40

Item 9
Pair of baja bay kombi rear fibreglass flares , these have been previosly fitted to a bus so are drilled
SOLD & GONE

Item 10
4off Firestone Cavallino 165R15 Tyres , these have approx 75% tread and are all in good condition
$20 each

Item 11
2lt Type 4 crank , this has had all jornals machined and i have bearings to suit
SOLD & GONE

Item 12
2lt 228 mm type 4 flywheel , again this has been machined and is ready for a install
SOLD & GONE

Item 13
Type 4 crank case , this has been line bored to 60 thou for memory and has been modified to suit a upright conversion ie i dont believe you could easily fit pancake tinware plus the chimney has had the clip holes drilled out also to suit a sharpbuilt upright kit
SOLD & GONE

Items 14 & 15
3 off early beetle wiper switches , these are both in full working condition with the rubber bladders both excellent as well so will pump as they should
$100 each
Seller : Andrew
Postcode :4161
Location : Alexandra Hills Qld
Contact : PM or 0411556744

PS , Am happy to post items anywhere at buyers cost

Hi Andrew,

Interested in building an upright conversion. The crank has the bearings to match the type IV case? Do you know approx how much a sharpbuilt type 1 conversion costs. Doesn't look like a lot but just wondering. I'll PM you my details as I'm in Canberra and need to get it shipped.

Have sent PM.

I'll have 11 and 12 thanks andrew ,i'll give you a ring wednesday

PM sent re ITem 1 Mitchell

Still a few thing left kids

Have you got a picture of the early beetle beauty trims???
cheers shane.

Sorry dude you'll have to wait a week as my camera is on a cruise to Vanuatu , with my wife / cook , god i wish i'dd gone on the cruise

No worrys,im in no hurry

I'm interested in a few 165/15 feet pls
grab a pic when ya can n let us know - pm
in no hurry either
cheers h

did ya get the camera off the holiday maker yet??

Bump , and will send out pics to requests today

Hi Andrew,
need a BIG favour can you please give me
a call on 0401 717 487, dont worry I wont be offended
if you say no.
cheers
John

pics?? andrew I got nuthin?

Oop's will send you some pics of the tryes on the weekend Paul , as i need to pull them out

schweet

Hmmm...hey Andrew, has item 9 gone yet? If not can I grab them please...To hell with it all....I'm going for it next year!

Hey mate, Do you have a shopfront at stafford i can come and see you when I come down later in the week?
New to the whole VW thing and want to ask a few questions and see what go fast bits are available.
Cheers
Pete

$2.63 Yea no worries there still here , and i am comming out Ipswich way on Sat arvo / night for a run at the drags with the Rat Racer so can bring them with me if ya wanna meet somewhere .

Beetle ute , Sorry dude am no longer a part of CVD but you can still drop into the shop as noted in my Sig bar and talk to Peter who is now running that shop

Andrew

Have you sold the rear IRS shockies yet? Would also be interested in a couple of your tyres too if they are still available.

Cool Andrew, I need to head up to Wavell Heights this week if either Eileen or yourself is heading to CVD at all, may be easier to take them there. Otherwise a meetup will be fine, only past the freaking motorway roadworks if you have a trailer....It's like a maze atm which seems to change weekly! I'll give you a buzz later in the week if CVD a no go. Thanks.

how'd ya go andrew?

pauly pauly , life is so dam busy man , but i havn't forgotten ya ,ssssssssssooooooooooonnnnnnnnnnnn

okidoki

Hiya Dude,

Interested in items 8 and 10. I'm in north Brissy so easy to come get them.

Piccies of the tyres would be handy tho

Cheers,
Mike

hopefully andrew will find time soon..

bump

Andrews actually in tassie at present , but the tyres are still sitting here pauly

ok cool some pics when he gets back pls..
he knows