Board Logo

1303 floor pan f/s
vwstu - December 6th, 2010 at 10:24 PM

i have for sale a 1303 bare but restore i.e.
new halves with three point seat mounts
no beam ,no box

really not sure what to ask for it so i'm open to offers

i'm in ferntree gully Melbourne 3156
give us a call and take a look if your in resto mode and have rusted out floors

cheers Stu
0421022264

1303Steve - December 7th, 2010 at 08:08 AM

Hi

Just to avoid any confusion, what do you mean by "no beam"? A 1303 pan wouldn't have a beam to start off with.

Photos would help with your sale.

Steve

vwstu - December 11th, 2010 at 09:26 AM

hmm
it is the model which has 12v floor pan ,12v beam,gear box with a thrust bearing guide and drum brakes all round

it may be a 1302

barls - December 11th, 2010 at 09:31 AM

no just a standard. 1302s have struts. id say its a 76 pan as they have all the items you describe

Joel - December 11th, 2010 at 10:33 AM

Not with 4 wheel drum brakes its not.

It'll be a late 74 1300 bug floor pan if its got 3 point seats so it will also be swingaxle not IRS unless its been converted

vwstu - December 13th, 2010 at 09:30 PM

DEFINATLY SWING AXLE
AND HAD THE SCREW ON DASH PAD, WHICH IS STILL AROUND SOMEWHERE
ANYWAY THE PAN IS STRAIGHT AND READY TO FIT ,THE SEAT MOUNTS CAN BE CHANGED IF REQUIRED TO 12V SLIDERS

colonel mustard - December 13th, 2010 at 10:38 PM

so, change the thread title :)

Craig Torrens - December 14th, 2010 at 04:37 PM

Its a 74 pan :yes:

cam070 - December 14th, 2010 at 09:11 PM

What condition is your dash pad in? If its good let me know.