Board Logo

Brand new 2800cc type 4
RodPenrose - December 15th, 2010 at 07:51 AM

I have a complete 105mm x 80mm type 4 engine here I have not had time to install in my bus . It has a Scat c35 camshaft , lube-a-lobe lifters , 105mm JE pistons , Scat H beam rods , Fat Performance crank , porsche cooling kit , 48mm IDA carbs , 200mm flywheel , Squareport heads , 48 x 40 stainless valves ported relocated plugs , and a lot of other good parts . I would like to get $ 9000 for this engine that is located in Wollongong NSW , ROD , 02-42729920 .


vwsteve - December 15th, 2010 at 08:03 AM

just what i always wanted, if only i had money


HappyDaze - December 15th, 2010 at 09:15 AM

Crikey Rod, that would be the go in 'No.8' Beetle:?: By the way, - I won't tell anyone - you left off the post code:!: The death penalty still applies, I think.:lol::lol::lol::lol:


LUFTMEISTER - December 15th, 2010 at 04:07 PM

crucifixition.....1st offence
The "comfy chair"......2nd offence
2 weeks in woolongong... 3rd offence
4 weeks in woolongong ...4th offence
sweet sweet death (after the gong)......5th offence :crazy:


matberry - December 15th, 2010 at 11:11 PM

:lol::lol::lol:


typ268 - January 10th, 2011 at 06:01 PM

Would this go into a 1960 bus?
Could I get it registered with a brake upgrade?
What else would I need to do?
Thanks.


Craig Torrens - January 10th, 2011 at 08:25 PM

Quote:
Originally posted by typ268
What else would I need to do?



get NRMA membership :lol:

its worth it for all older cars :dork:


johny rotten - January 10th, 2011 at 08:30 PM

Quote:
Originally posted by Craig Torrens
Quote:
Originally posted by typ268
What else would I need to do?



get NRMA membership :lol:


yep go with NRMA Gold :lol:


johny rotten - January 10th, 2011 at 08:31 PM

Quote:
Originally posted by typ268
Would this go into a 1960 bus?
Could I get it registered with a brake upgrade?
What else would I need to do?
Thanks.



Yeah Get Wayne to do the Blue slip :blush:
tell em its a 1700


typ268 - January 11th, 2011 at 07:39 AM

Thanks for the help.
So its a no go then?


hellbugged - January 11th, 2011 at 07:54 AM

Quote:
Originally posted by typ268
Thanks for the help.
So its a no go then?


give Rod a call (the seller of this engine) he will be able to answer your questions and probably have alternatives if this motor doesn't suit.......