Aussieveedubbers - Powered by GaiaBB

(WA) Subi EJ22 for sale(sold )

Desert Moose - January 1st, 2011 at 11:59 PM

Hi All I have Got a 2.2 litre from a liberty, as it was pulled from the car, comes with harness, has pwr steering pump and aircon still attached, plus exhaust manifolds

Selling as no longer needed because I sold the project it was going into

has a some crack in the right hand timing belt cover and an alternator idler pulley is bent.

can send photo's (hopefully I'll post them anyway soon)

sold

or happy to swap for type one engine

Phone 0429200011 or PM/ email

Ballajura WA 6066

Thanks

Chris

psimitar - January 2nd, 2011 at 04:00 AM

Oh if you weren't in WA I'd say yes. Just out of curiosity is it a series 1 or 2 engine?

Means an extra 10bhp

Joel - January 2nd, 2011 at 07:05 AM

That's only North America spec.

AUDM series 2 were only 8hp (6kw) less

EJ22 90-94 Power 100kW @ 6000rpm Torque 189Nm @ 4800-4800rpm
EJ22 95-96 Power 94kW @ 5200rpm Torque 190Nm @ 4000-4400rpm
EJ22 97-99 Power 98kW @ 5600rpm Torque 193Nm @ 4000-4000rpm

Desert Moose - January 2nd, 2011 at 11:00 AM

its a 95 if that helps.

they all look the same to me...lol

let me know of a specific thing you would like a photo of and I'll do it while I take some pic's

Desert Moose - January 2nd, 2011 at 07:03 PM

can get photo's of anything you need to see

Desert Moose - January 7th, 2011 at 09:44 PM

open to offers....

I have no need for this engine

psimitar - January 8th, 2011 at 09:02 PM

$250 you said aye? let me know how much it weighs so I can have a word with couriers.

It's very tempting

Desert Moose - January 8th, 2011 at 11:01 PM

Quote:

Originally posted by psimitar
$250 you said aye? let me know how much it weighs so I can have a word with couriers.

It's very tempting

$200 so it helps with Shipping

or to buy the beer to fit it

psimitar - January 10th, 2011 at 08:19 PM

but whats it weigh dude? need that for a courier quote and your postcode

Desert Moose - January 11th, 2011 at 12:24 PM

Quote:

Originally posted by psimitar
but whats it weigh dude? need that for a courier quote and your postcode

sorry missed that bit....lol

its heavy and its in Ballajurra WA 6066

I'll work out how to weigh it for you

gaz58t2 - January 12th, 2011 at 07:24 PM

Hi

not sure if its the same as mine but does it have 3 or 2 wiring plugs hanging of the right side as can not see from pics
Cheers Gaz

Joel - January 12th, 2011 at 07:50 PM

Gen2 have the plugs bolted to the bellhousing
You can just see them under the intake donkey dick in the 1st pic

Fastie - January 13th, 2011 at 08:00 PM

It should weigh 130kg

psimitar - January 14th, 2011 at 08:29 PM

Oh, if it's 130kg then thats just over $200 to Brissy Hmmmm, oh wifey.........

DieSchnelleKafer - January 16th, 2011 at 02:20 PM

have you heard this thing run, what it like? how much effort to make it run?

Joel - January 16th, 2011 at 02:44 PM

Quote:

Originally posted by Fastie
It should weigh 130kg

Thats on the mark, my new engine with the a/c, powersteering, a tyre under the sump on the pallet was 137kg according to the shipping docket.

psimitar - January 16th, 2011 at 09:06 PM

Before I commit to buy dude what gaurantees can you give me that it runs with no known knocking, oil burning etc? Basically is it a sound engine?

Cheers,
mike

Desert Moose - January 16th, 2011 at 10:15 PM

Quote:

Originally posted by psimitar
Before I commit to buy dude what gaurantees can you give me that it runs with no known knocking, oil burning etc? Basically is it a sound engine?

Cheers,
mike

Well its a second hand engine, so for $200 I'm not giving any warranty or guarantee but It was a running engine and I can give you my word on that. It has a small crack in the timing case cover right hand side as you can see in the pic and a belt tensioner is bent as I have said before. The motor was pulled from a driving wreck and I was going to use the motor for a project buggy (which I put a 1600tp in and I'm selling soon). I'm happy for you to have someone from the forum here in WA to come and have a look at the engine before you buy it and in fact it would make me happier if you did.

Feel free to contact me if you like

Cheers

Chris

psimitar - January 16th, 2011 at 10:57 PM

Hiya Dude,

I'm not fussed about a crack in the plastic timing cover and a bent pully isn't really a worry either.

Not sure who or how I can get someone to look it over. If you know any other forums members near you that's cool but for $200 if you say it was running then I think I'm game

Cheers,
Mike

Desert Moose - January 17th, 2011 at 11:23 AM

well work out what you would like me to do now.

and I'll get it on a skid and strap and rap it up

bigrudi - January 17th, 2011 at 07:58 PM

geez a 2.2 subaru for 200 bucks complete, the alternator is worth that much, if it was free they would want u to deliver cheap s/h engine

psimitar - January 18th, 2011 at 10:14 PM

PM me you bank details and address dude. The courier says to pick up they need either lifting equipment of your own or a strong chap to help lift it into the van.

Once I've deposited in your account and organised the courier, actually I need to know a date for the courier to come pick it up before I can book them.

Um, yea with those details done deal

Cheers,
Mike

Desert Moose - January 19th, 2011 at 08:52 PM

pm sent

Newt - January 21st, 2011 at 12:17 AM

Mike,

If it doesnt get sold, Ill be in Perth in a couple of weeks time and can buy/find a use for it.

Newt