Board Logo

Wanted -Rear lower cylinder deflector tins
alien8 - January 9th, 2011 at 10:30 PM

Hey , I am chasing a set of German lower rear deflector tins for a Type 1. As scene in the attached pics they are located under the rear brest tin up against the lower rear cylinders. I need both the right and left side tins pieces. If you have a usuable set siting around let me know.PM me here.
Cheers
Brad
Bris
4207

vwperformance - January 10th, 2011 at 01:27 PM

PM sent

Ian Bugden - January 11th, 2011 at 11:09 AM

I am also after 2 sets of these so if any also has them laying around That would be nice.

vwperformance - January 13th, 2011 at 07:16 AM

PM sent.

Thinker - January 13th, 2011 at 08:05 AM

didi this tin come on all bugs
i didnt even know it was meant to be there.
i am current doing a rebuild and noticed my motor was missing the defecter that sit right under the cyclinders and i sure dont have these bits.
are they needed and can you still buy them.

Arpspasm - January 13th, 2011 at 10:40 AM

Yeah all original tinware is there for a purpose. I believe that the rear deflector tins purpose is to make the air travel all the way through the fins before leaving the rear of the vehicle. I would recommend highly geting second hand original tinware over new as the new stuff is cheaply made, doesnt fit well and often is missing important pieces.(This was illustrated to me recently and I now have several pieces of "new" tinware that I wouldnt put on any engine").

kieranweston - January 13th, 2011 at 01:46 PM

Im after the right side one if possible?