Board Logo

Parts needed for oval and late type 3
Kuchster - January 15th, 2011 at 10:27 PM

For Oval
Door light pillar switch (clip in not screw in)
Headlight switches
Wiper switches
Horn Button
Sunvisor only or complete with mirror
Door middle bolt on support
Front hood latch that bolts onto body of car (4 bolt not 3)
Wiper arms and Wiper blades

For Type 3 (I may sell the car if anyone is interested in a 1970 type 3 squareback, mostly complete, pulled apart and started on rust repair)
Passenger door chrome strip
Front drivers guard chrome strip
The strip that goes along the bottom of the heater channels both sides
Dash as good as possible, dont mind a few small cracks
Front bonnet emblem
Ignition switch, dont need the barrel etc, just the electronic switch
Gear knob

Thanks,
Kuch


Kuchster - January 25th, 2011 at 02:20 PM

Few pms on the type 3 parts, but i really need the oval stuff.


vintageaironly56 - January 26th, 2011 at 11:37 AM

i have a 55 horn button $70, maybe some wipers and switches etc. will not fit 54 or earlier split though.


rebel - January 28th, 2011 at 06:43 PM

have 56 horn button also white switch knobs will swap for type 3 parts pm sent


bushed - January 28th, 2011 at 08:27 PM

are they same as 56?

Quote:
Originally posted by vintageaironly56
i have a 55 horn button $70, maybe some wipers and switches etc. will not fit 54 or earlier split though.


rebel - January 30th, 2011 at 12:05 PM

yes 55 and 56 are same


Kuchster - January 30th, 2011 at 08:55 PM

No pm, i dont have any type 3 parts to swap.

You can also email me robert@kuch.com.au

Suit 56 oval.

Thanks


Kuchster - February 7th, 2011 at 10:00 PM

Any info? I still need these parts