Board Logo

EJ20 adaptor & 200mm flywheel
1303Steve - March 4th, 2011 at 07:01 PM

Hi

I have a unused EJ20 adaptor & 200 mm flywheel, well bolted on only actually. Made by Unicap in Sydney.

$640 Happy to post

Call Steve 0439 133 354

Located in Lugarno 2210 in Southern Sydney

Steve

chellejohno - March 4th, 2011 at 07:23 PM

Hey Steve,

i'm looking for an ej22 adaptor for my 74 2ltre kombi. Am I right in thinking they are the same adaptor/flywheel for both?

cheers Johno

1303Steve - March 4th, 2011 at 07:39 PM

Hi

The adaptor would be the same but the flywheel wouldn't suit. Your car has 228 mm flywheel and longer input shaft in the gearbox. It could be made to work but its not a bolt in.

Steve

dr strapp - March 5th, 2011 at 07:33 AM

Sorry to step on your post Steve,Johno I've got an adaptor for ej18-ej25,with flywheel,220 mm Sachs clutch assembly and a ej18 I'd throw in....been meaning to list ..0418164059 if this helps.....thanks..JJ

STIDUB - March 5th, 2011 at 02:49 PM

dude, make your own post and follow the rules for it too, thats just shit :td:

DieSchnelleKafer - March 5th, 2011 at 04:37 PM

oh snap

dr strapp - March 12th, 2011 at 12:22 PM

Hi Steve...
I need to make an apology,I recently read your ad without my glasses and mistook fj20 as FI20,(whatever that is ) not clever.Then, posting my item on your post was totally out of order.You were ticked off,and rightly so......and I apologise again..JJ (I could have posted as a private PM,but as I goofed in a public forum ,and that's where my apology should be,I believe)...

1303Steve - March 12th, 2011 at 03:51 PM

Hi

No worries, I'm always making mistakes without my glasses.

Steve