Aussieveedubbers - Powered by GaiaBB

Porsche Vented 4 wheel Disk Conversion - now on ebay $1!!!

SuperOwen - June 26th, 2011 at 03:29 PM

Porsche 944T Vented disk brake setup, should suit any model beetle.
Comes complete with new disks, pads, brembo 4 pot calipers off a 964 I believe, handbrake assembly, brackets for the front calipers and backing plates for the rear.

$2000

Will get some pics up during the week.

Owen 0413266808

SuperOwen - June 26th, 2011 at 03:30 PM

berg rubber mounted midmount
Never fitted, complete kit

$200

Owen 0413266808
Located in Bondi NSW

Craig Torrens - June 26th, 2011 at 05:49 PM

so all 4 discs are vented (front and rear) ?
are the rear calipers brembo as well ?
Is it a complete bolt on kit ?

SuperOwen - June 26th, 2011 at 08:28 PM

yes, yes and yes.
The calipers are porsche/brembo 4 pots from the 964 from memory. I'll jot down the part numbers etc when I get a chance to photograph it all.

phoenix_dr - June 26th, 2011 at 09:27 PM

Hey mate I'm interested in the gearbox mount
I'll try and call tomorrow, what time's good for you?

SuperOwen - June 27th, 2011 at 05:38 AM

anytime between 8 and 8

SuperOwen - June 28th, 2011 at 06:34 PM

Apologies for the delays in getting the pics, been sick. Hopefully tomorrow

hellbugged - June 28th, 2011 at 06:54 PM

yeah pics please

SuperOwen - June 29th, 2011 at 05:35 PM

Anyone who wants pics just email me
omilner@tpg.com.au

Just let me know if you want pics of brakes or mid mount or both.

hellbugged - June 29th, 2011 at 06:30 PM

SuperOwen - June 29th, 2011 at 07:35 PM

Midmount sold

SuperOwen - July 4th, 2011 at 09:43 PM

Brakes still available! Email for pics

hellbugged - July 5th, 2011 at 08:55 AM

SuperOwen - July 5th, 2011 at 12:15 PM

Cheers thanks for that

SuperOwen - July 16th, 2011 at 04:56 PM

Still for sale. $2000 ono

The pics aren't very flattering, the corrosion on the discs etc isnt as bad as it looks in the pics. Suggest anyone interested come and have a proper look.

Ollie - July 17th, 2011 at 02:50 PM

Pm'd! Cheers Owen

55micro - August 7th, 2011 at 03:15 PM

Hi superowen, Im after 1983-85 naturally aspirated 944 parts, just checking cause you have stated 944T.If their non turbo Im interested in the front and rear hubs, 2 backing plates including the e-brakes if their still available.
Thanks

SuperOwen - August 7th, 2011 at 04:22 PM

Sorry, not seperating

SuperOwen - October 23rd, 2011 at 08:46 PM

Brakes are still here if anyone's interested, make a realistic offer!

SuperOwen - October 23rd, 2011 at 09:04 PM

The front hubs are. The rears are porsche. Mean's it takes regular beetle wheel bearings, no adaptors needed.

SuperOwen - November 16th, 2011 at 09:28 PM

Now on ebay, no reserve!

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150700463466

matara - November 17th, 2011 at 02:05 AM

Owen, where did you get the seals from when you rebuilt the calipers. I have some 944T brakes that need some seals.

Thanks

Steve

SuperOwen - November 17th, 2011 at 05:16 AM

They were rebuilt when I got them. Try aporschepart or bob whyms?

vwo60 - November 17th, 2011 at 07:07 AM

Is the conversion engineered and what model does it fit as there is major differences in fitting these between different models.

cam070 - November 17th, 2011 at 08:58 AM

Owen, I got the bidding off the ground for ya, but reality has bitten and I'll let the serious bidders take over. Hope you get what you are after for them. I'd love to have them on my car, but gotta save for other parts first.

SuperOwen - November 17th, 2011 at 09:22 AM

It's a collection of parts, you would have to speak to your engineer.
The rear uses the Porsche backing plates, will bolt to any type 1 IRS or swingaxle. Type 3 as well I think.
The front uses modded type 1 hubs, so uses conventional vw bearings to any type 1/3 disk brake spindle.
No garuntees on figment, I didn't build it and have not tried to fit it. Your welcome to come and look measure etc.