Aussieveedubbers - Powered by GaiaBB

WTB 36 HP crank

vwo60 - July 28th, 2011 at 07:34 PM

A good 36HP crank is required for a rebuild, this is for a friend as the crank in his engine has broken, please PM me with the details and i will pass the details on, if possible please let me know the journal size's on the main's and big end's.
Thanks

h - July 28th, 2011 at 07:43 PM

dime a dozen :rolleyes:
erm goodluck finding yeah
bump for the local

LUFTMEISTER - July 28th, 2011 at 08:27 PM

Nos ones on samba

grumble - July 28th, 2011 at 09:29 PM

I think I still have a complete 36hp engine but would only sell as is,not interested in parting it out.I will have a look next time I am out home whether the is a bare crank but I am doubtful. PM if interested
Cheers Les

Craig Torrens - July 28th, 2011 at 09:34 PM

I have one as well as new conrods................will measure journals and let you know sizes.

beetleboyjeff - July 28th, 2011 at 10:04 PM

I had a bloke ring me during the week who had a complete 36hp engine and trans. He was going to restore an oval, but it rusted out before he got to it. I was planning to take some photos when I am home on the weekend and post them. I don't think he wants much for it (if anything), he just felt it was too good to throw out and wondered if I knew anyone who may be interested.

Craig Torrens - July 28th, 2011 at 10:19 PM

Its hard to find a crank that isn't cracked.

When I was building my 36hp I had to pull down 6 motors to find one good crank ! :spin:

vwo60 - July 28th, 2011 at 10:43 PM

Thanks for that everybody, would prefer sourcing one in Australia if possible, please let me know if any one has a good one.

fish26 - July 28th, 2011 at 10:54 PM

Quote:

Originally posted by beetleboyjeff
I had a bloke ring me during the week who had a complete 36hp engine and trans. He was going to restore an oval, but it rusted out before he got to it. I was planning to take some photos when I am home on the weekend and post them. I don't think he wants much for it (if anything), he just felt it was too good to throw out and wondered if I knew anyone who may be interested.

I am interested in the 36hp engine and box if still available.
thx Jeff,

ben

vwsteve - July 29th, 2011 at 05:38 PM

If the crank is for shaun im pretty sure i have got one for him already, i was going to tell him next time i see him in september

vwo60 - July 29th, 2011 at 06:27 PM

Hi Steve, he asked me to have a look, email him and let him know, the crank will need to be checked out to see if is not cracked or under size on the journals

beetleboyjeff - July 29th, 2011 at 10:32 PM

Quote:

Originally posted by fish26

Quote:

I am interested in the 36hp engine and box if still available.
thx Jeff,

ben

I didn't get a phone number, but he is supposed to ring me over the weekend. I will let you know as soon as I know.

fish26 - July 30th, 2011 at 08:41 AM

Thanks Jeff

beetleboyjeff - August 27th, 2011 at 02:18 PM

OK, I finally got the photos of the 36hp engine & trans. He also has a lot of other bits & pieces off the car - semaphores, lights, windscreen, etc. if anyone is interested.

He is renovating his house, so wants something for the parts, so make an offer. His name is Mal. Ring him on 0410 236230 for more info.