Board Logo

WTD drop spindles
starkz - August 5th, 2011 at 07:20 PM

Hi guys,
Chasing a pair of drop spindles for my lowlight single cab. It has a disk brake, ball joint front end.
What is out there?
Cheers Rory

zayus - August 6th, 2011 at 02:13 PM

Search online, eg: VW Bus drop spindles BJ front end disc brakes.

luftwagen - August 6th, 2011 at 08:29 PM

WHAT'S YOUR LOCATION?

urban_myth - August 6th, 2011 at 10:25 PM

send me some spindles and i will make some for you.50mm drop or 65mm drop.standard offset,13mm per side or zero offset.0416 067 932

QuikBug - August 7th, 2011 at 09:18 AM

Be very careful buying welded spindles. I have looked into this and was not able to get welded spindles engineered.

farquire - August 7th, 2011 at 10:32 AM

just bought some from transporterhaus in the uk,not welded,new ball joints,full suspension travel,under a grand delivered,check their web site

starkz - August 7th, 2011 at 11:05 AM

Hi guys thanks for the info. Not to keen on getting welded ones will look into the ones from transporterhaus. I am located in south east Melbourne.
Cheers rory

luftwagen - August 7th, 2011 at 03:00 PM

I HAVE A SET OF WELDED ONES I BOUGHT LAST YEAR WHICH I NO LONGER REQUIRE, NEVER USED AND VERY HIGH QUALITY, 2.5 INCH DROP, WILLING TO SELL FOR $400 WHICH IS WELL BELOW COST. IN NEWCASTLE/HUNTER AREA.

paulr - August 8th, 2011 at 09:07 PM

Luftwagen
Who made your spindles ? Got any pics ?
Cheers Paul

luftwagen - August 10th, 2011 at 04:12 AM

will take some pics on weekend and post, made by guy from sydney who goes by username of understated on some of the other vw sites.

urban_myth - August 10th, 2011 at 09:46 PM

thats me.urban_myth is my son.