Aussieveedubbers - Powered by GaiaBB

WTD - Lip on Early headlight bucket

Turbo54 - August 31st, 2011 at 03:16 PM

Hi All,
I need the little lip off a early guard that your headlight rim hangs off at the top. These are attached to the bucket. If anyone has a smashed guard and that could cut that little bit out for me,
Please let me know,
Thanks
Heath
0434 943 058

1303Steve - August 31st, 2011 at 04:14 PM

Hi

Is this for fibreglass mudguards? I usually make a them up out aluminium 3x10

Steve

STIDUB - August 31st, 2011 at 05:27 PM

Steve, got pics of what you did?

Turbo54 - August 31st, 2011 at 06:49 PM

Yes Steve for glass. I was just going to cut a slit into the top of the bucket and slide/ glue and glass it in.
Do you have any spare. I have one from a old guard I have lying around but if you have a set of them let me know.
Thanks
Heath

1303Steve - August 31st, 2011 at 10:01 PM

Hi

I dont have any pictures, I will take some.

All that I did was make up some brackets that can be pop riveted on and use a spare headlight rim to test how they fit.

You will also need another bracket for the headlight screw if your using Porsche 911 headlights like me.

Steve