Board Logo

Wanted - NSW - 1600 engine tin to suit bay window kombi
IWL_86 - December 30th, 2011 at 05:45 PM

Hi there,

I'm looking for a motor for my bay window kombi. Preferably a 1600 or bigger type 1 or even a type 4 will do!

I'm really trying to get this done ASAP. I've got coin ready and won't mess around.

Pm me if you can help me.
Isaac
Located Sydney area.

Pattison - January 3rd, 2012 at 02:49 PM

Hi Issac
I have a type 4 engine (actually its a 914) 1800cc with factory EFI.

It is complete and in good condition, but is in pieces.

Let me know if your interested.

0408 608 901
Cheers
Rel

IWL_86 - January 3rd, 2012 at 09:33 PM

Thanks for the replies. I'm building an engine now from a good donor case, but I am having trouble locating some tinware that would suit an upright motor in a late bay window.

donn - January 4th, 2012 at 05:51 AM

If it's just tinware your after I may be able to help, I've got a complete set (I think) off a type 1, don't know how it will go in a Kombi though.

IWL_86 - January 4th, 2012 at 06:18 AM

There is two large pieces of tin that I'm missing. They were only fitted to late model kombi engine bays that would also accept a type 4 motor. I'll post up a picture to show you what I'm talking about.

scot70wagon - January 4th, 2012 at 06:28 AM

that tin ware is a bitch to find. took me a month to find it for mine.

11CAB - January 13th, 2012 at 11:32 AM

I've got the large rear piece that you are chasing, but I'm in Brisbane.

IWL_86 - January 13th, 2012 at 12:10 PM

Thanks Graham,

I'm super keen if you could send it down my way. I've just sent you an email regarding this.

Thank you kindly.