Board Logo

FS: Used 1600 Piston and Barrel Kits
Craig Torrens - January 16th, 2012 at 08:41 PM

Item: 1600cc Piston and Barrel Kits
Condition: Used but reconditioned
Description: I have several P&B kits that are left over from 1915 conversions. The Barrels have been freshly honed, so they just need new rings to make them ready to be installed. These would be perfect for upgrading a 1300 or 1500 motor.
Price: $95 per kit plus postage.

I'm happy to post or they can be picked up from Galston NSW

Contact can be made via PM
Cheers
CT

Craig Torrens - January 19th, 2012 at 05:22 PM

bumpsie

whatnow - January 19th, 2012 at 07:08 PM

do you have 2 87mm p & c's ?

Craig Torrens - January 19th, 2012 at 09:48 PM

I will have a look for you Henry.........I think I have a good set of 4 that I may sell.

whatnow - January 20th, 2012 at 12:39 PM

thanks craig, i'll pass if it is a good set. i only really need 2 ok ones. it's just for a shooting buggy engine.

the idiot previous owner left the car outside on a rainy day with the aircleaner off. :mad:

Craig Torrens - January 22nd, 2012 at 09:44 PM

Hi Henry, I only have the good set of 4....sorry.

Craig Torrens - January 26th, 2012 at 07:37 PM

Only 2 kits left..........these are perfect for a future rebuild :)

Beerboy - January 28th, 2012 at 06:26 PM

you got pm mate :-)

Craig Torrens - February 1st, 2012 at 10:25 AM

one back at ya !!

ready to send ;)

kombibob - February 1st, 2012 at 11:08 AM

Don't have any 1300 ones do you?
Wanting to build down a 1600 to 1300 so I can run my judson.
I have one good set but the wrist pins are smaller than 1600 so thinking they could be 1200???
Cheers,
Bob

Craig Torrens - February 1st, 2012 at 11:14 AM

I will have in about 2 weeks....as I'm converting my 1300 to a 1600 !!!

Do you need heads as well ?

kombibob - February 1st, 2012 at 11:20 AM

Sweet .
Have a good set of 1300 sp heads.
Do you know if 1300's came out with smaller wrist pins at any stage?
Cheers.

Craig Torrens - February 1st, 2012 at 12:18 PM

1300,1500,1600 are the same.......36hp are smaller.

I think 1200 are also the same size as 1300 etc