Board Logo

FS-NSW--narrowed Adjustable link pin beam with leaves+front disc kit + drop...
ashbaxter - February 27th, 2012 at 08:20 PM

Issue with beam, it has been made slightly off centre maybe 10mm to the right didn't work with my ghia as there is not much clearance but you could probably get away with it on a beetle or if you are handy and particular some cutting and rewelding could make it right. Comes with shortened leaves.

Make an offer

Pm or 0418689252

Cheers
Ash

ashbaxter - February 27th, 2012 at 08:34 PM

I am selling a front disc brake kit with drop spindles to suit link pin front end.
They have been on the car for a couple of months and driven about 10klm.

The drop spindles push the front wheels out about 1" on each side and on my ghia with the wheels I have it just doesn't leave enough clearance.

$400

Pm or 0418689252

Cheers
Ash

PASHN8 - February 28th, 2012 at 12:30 PM

Ash, when you say made off centre, which part is off centre? Who made the beam and how much is it narrowed by, and what adjusters does it have?

ashbaxter - February 28th, 2012 at 01:28 PM

It's one of these jobs but the adjusters are not red, 2'' narrowed.
The mounts in the centre where you bolt it on are off centre.

phoenix_dr - February 29th, 2012 at 06:46 PM

Hey mate just a question about the front discs; what stud pattern are they and do you know who made them?
Thanks

ashbaxter - February 29th, 2012 at 06:54 PM

Wide 5 empi I believe

captainvw - February 29th, 2012 at 07:16 PM

Where did you buy the beam from?

ashbaxter - February 29th, 2012 at 07:41 PM

Volks I think I bought heaps of parts about a year ago from a few places