WTB Deck Lid Hinge Stiffeners
Pumba - April 21st, 2012 at 04:54 PM
Im after a set of the deck lid hinge stiffeners.
cheers shane.
HappyDaze - April 21st, 2012 at 05:29 PM
Pumba - April 21st, 2012 at 05:41 PM
The U shaped brackets that the 3 10mm bolts go through that hold your deck lid brackets to the body.
HappyDaze - April 21st, 2012 at 07:52 PM
They are not hard to make, if you have a sample. I made a couple out 2mm steel, using a drill and an angle grinder. The bolts are M6, by the way. If
you have any trouble making them, let me know.....I could make a couple more.
Pumba - April 21st, 2012 at 08:21 PM
| Quote: |
Originally
posted by HappyDaze
They are not hard to make, if you have a sample. I made a couple out 2mm steel, using a drill and an angle grinder. The bolts are M6, by the way. If
you have any trouble making them, let me know.....I could make a couple more.
|
I dont have a sample to make them off,not many people use them anymore i just thought someone might have a set laying around.
h - April 21st, 2012 at 10:49 PM
a broom stick buddy never fails to hold up a W 
Pumba - April 22nd, 2012 at 08:54 AM
| Quote: |
Originally
posted by h
a broom stick buddy never fails to hold up a W
|
Hey pauly,these are only to stiffen the brackets so they dont flex when opening and closing lid.I found a guy on the samba who makes some nice
machined ones but i want some standard ones.
hellbugged - April 22nd, 2012 at 09:05 AM
got a pic/link of these whatsamejiggas
Pumba - April 22nd, 2012 at 09:24 AM
Top one is standard,bottom one new machined ones.