I'm after a local source for some stainless steel exhaust tube....

Specifically a 45º, a 180º and some straight length in 2.5"ø.

I can get what I need on ebay for about $120 (east coast supplier), but thought I'd see if anyone here might have some good local contacts.

Cheers.....

I have some tube a few metres
1 x 90deg bend
Prochem for the win

Try Westi.....he supplied some mild steel ones for me.
I'm sure he'd have stainless.

theres a mob in canning vale, main wholesalers, they'll be in the yellow / white pages. cheap and very helpful, i got all the stainless pipe for my syncro from them!

Usually get them from a mob in Bentley, but couldn't be arsed to drive out that way during peak hour.... Hence the need to find another source.... In the end I scored some off a local supplier for a very good price.... Better than wholesale.
The new muffler position is done and ready to TIG up during the week....

Thanks for the advise fellas.

Post some pics

Not very interesting Andrew.... It's nothing flash.... Just the muffler was repositioned.... This sidewinder has actually caused me a few headaches.... Firstly.... The suppliers advert says it fits Baywindow's.... It doesn't.... But as I was planning to make my own rear mount, it wasn't such huge issue, but then there was the clearance problem that reared it head.... My bus is reasonably low.... Sidewinders don't do low.... Hence the need to reposition the muffler.

This is how it was....

Almost done....