*i have two sets of carbs. 1 pair of 40 dcn webers on short berg manifolds so will fit type 3 and beetle. good condition just need a set of linkages. scat linkages are cheap and easy to set up $450
*1 pair of 35 scat carbs. single throat with chokes so a perfect replacement for kombi carbs as you can bolt onto original manifolds. Alternatively they are on dual port beetle man ifolds and will bolt straight on. Again a scat linkage is required not supplied. these were on my baja when i bought it and have done 2000 klms. were replaced with a more expensive set of 40 idfs. these scats held there own against the webers , and are a legitimate alternative to those cheap and nasty 34 icts. $300
* sidewinder stainless extractor /exhaust i bought off das and have gone a different way. $190

Ca newcastle. cheers scot 0414 881 084

If you post the side winder to Melb then I may have a buyer for it.
Let me know and I'll follow up

can put it in a box and send it at your cost no dramas.

Cool will let you know today
What brand is it?
Is it a cheap Chinese copy?
Also it comes with j tubes And muffler right?

You have PM about 40DCN cabs

I'll grab the exhaust please (side winder) Postage to Melbs 3109

2nd dips on the exhaust if it falls through. Also located in Melbourne 3765
Cheers rory

dubcty no pm received mate. Empi freight would be $20. cheers

PM take 2 sent! lol

dubcty still no go on the pm. just give me a shout on the old phone to discuss, cheers.

i also have another set of stainless extractors in the conventional large flange central exit style. $120

Cheers again for the help Scot, hope everything sells for you.

Cool mate please PM me bank details. cheers