I'm selling a 1641 twin port type 1 motor. It's a reconditioned motor built by Remtec in the UK. These are built with new heads and a reconditioned crankcase, crank. It's done less than 15K kilometres and is in great condition.

Internally standard except for a Scat C25 cam. It comes with a pair of 36 Dells on a CB performance linkage with CB filters, a Bosch 009 distributor with a Pertronix module, bolt on rocker covers, clutch, a Bugpack hideaway exhaust on a small flange header in ceramic coat, and heat exchangers.

You will need to add your own tinware, alternator, stand and fuel pump.

Mike at CBB tuned this on his dyno, and it produced 52.6 HP at the wheels. I can provide a copy of the dyno chart and pics of the motor for anyone serious. The engine is out of the car now, but Mike is happy to take a call to confirm it's in good condition and runs great.

I'm looking for $2K, which I think is a good price when you add up the cost of the carbies, linkage, exhaust etc.

Based in Gordon, up near Hornsby NSW, happy to deliver if close by.

Send me a PM if you're interested.

PM Sent

Thanks to everyone who's sent me a pm. To be fair, I'm just going to work through in order til someone buys it.

Just had a look at the motor this morning, and it also needs a dissy cap, plug leads and the oil cooler. So pretty much all the ancillaries except clutch, exhaust, carbies, distributor body and linkage.

Perfect if you've already got ancillaries. No bad thing to be fitting new plug leads and dissy cap anyway.

Sold to Dibsy, thanks everyone