Board Logo

WTB Crank / Rod / Cam Bearings
T-34 - July 14th, 2012 at 05:55 PM

Need the following bearings for my stock 1600 rebuild.

Standard cam bearings

Standard big end bearings

Standard main bearings +1mm OD (for line bored case).

Give me a shout if you can help me out.

Mick.
0428428864

mick@vdubber.com

Dasdubber - July 16th, 2012 at 07:43 AM

G'day mate,

we have the Mahle cam and rod bearings in stock currently:

Cam bearings:
http://dasrestoparts.com.au/cam-bearing-set-std.html 

Rod bearings:
http://dasrestoparts.com.au/rod-bearing-set-std.html 

Thought I had the standard crank/1mm oversize case main bearings however I only have them up to standard/0.5mm oversize case sorry:
http://dasrestoparts.com.au/main-bearing-set-50-std.html 

Cheers
Al

matberry - July 16th, 2012 at 09:26 AM

What thrust on the mains?

T-34 - July 16th, 2012 at 12:37 PM

Hi Matt. Thrust is standard, however I took the plunge and ordered them from mofoco at the weekend with some other parts.

Don't think my forum notifications are working, shame as I would have preferred to source them from Aus. :(

The price of impatience - lol.

Thanks for the replies guys.

Mick.