Board Logo

what are my options webber 44,s
mick r - September 1st, 2012 at 07:52 AM

HI I have 2276 c45 cam 043 heads,beetle,wk end driver,what are my options dual 44 webbers or what else do you have for sale,cheers Mick R.

1916baja - September 1st, 2012 at 08:15 AM

Call rod. http://www.rodpenroseracing.com.au/ 

fish26 - September 1st, 2012 at 09:45 AM

45 dells, if you can find a good matching set.
I've also heard from a buddy of mine in the states, the Empi HPMX can make more hp than the webers, I think Roger Crawford might have done some testing back to back on the dyno.

coletrickle - September 1st, 2012 at 02:32 PM

Italian 48 ida's I'll have a pair for sale in the next week or so.

vwo60 - September 1st, 2012 at 05:45 PM

I run a set of 48MM drla's on the ghia with a 2276 and a set of 44 IDF's on the beetle with 2054, the dellorto's are very streetable with the FK87 and 11 to 1. you can pick them up , on the samba there are quite a few pair,

matberry - September 1st, 2012 at 05:59 PM

I have a few questions, what's done to the heads and what is the compression ratio (I could go on)...?

mick r - September 1st, 2012 at 07:17 PM

HI Matt an Crazy Cole.NO HEAD WORK YET,GUY AROUND CRN HAS FLOBENCH AND USED TO RACE F,VEES HE IS KEEN TO GIVE THEM A GO. COMP NOW APP 8.1 WAS 10.1 .WILL TRY TO RING MATT ON MON.THANKS FOR ALL REPLYS MUCH APPRECIATED.MICK THE CRAZY GERMAN.0402492667