Board Logo

Fuel tanks and trims.info
jjwebb123 - February 23rd, 2011 at 06:00 PM

Hi Guys,how are we.
Just chasing a bit of info.
first of all.I have been looking around for a new tank for my beetle.After contacting several suppliers(all have been terrific) it seems its hard to get RHD fuel tanks.Just wondering if anyone else has succeeded in locating a new RHD Beetle tank.

Second,just personal opinion,but what type of door trim do most of you prefer eg,tmi,?

Look forward to your feedback.
Jas.


Mr Bubble Head - February 28th, 2011 at 09:23 PM

I'm sure your not going to get a new RHD tank on these shores mabey mexico but you'll be paying for it if you ship one. Whats wrong with refinishing a second hand tank? Clean it inside and out respray the outside run a por 15 tank kit through it. even better than new. and correct to your model year.

Interior there's many options, rule of thumb you get what you pay for.


zayus - March 2nd, 2011 at 09:45 PM

Quote:
Originally posted by Mr Bubble Head
Clean it inside and out respray the outside run a por 15 tank kit through it. even better than new.


Mr.Bubble Head, does that really work?

I am certain, my tank needs to be replaced or repaired.
But, was never sure how well a repaired tank would function.

Time to do some research on the POR 15 Tank Kit.

Thanks.


pod - March 3rd, 2011 at 10:00 AM

ive used the Por15 tank kit in my Kombi,works a treat ,bought it from Vintage :tu:


Joel - March 3rd, 2011 at 03:54 PM

Is there actually a difference between LHD and RHD tanks for standard beetles?

Its been years since I've owned one but I seem to remember the bottom of the tank being pretty symmetrical like Superbugs.


Arpspasm - March 4th, 2011 at 10:51 PM

Quote:
Originally posted by Joel
Is there actually a difference between LHD and RHD tanks for standard beetles?

Its been years since I've owned one but I seem to remember the bottom of the tank being pretty symmetrical like Superbugs.


I can't remember with 100% certainty but I did have my tank out recently (71 super) and I believe that it had a different shape for where the steering column passes underneath?

Edit: maybe the filler is on the other side for LHD models.


jjwebb123 - March 5th, 2011 at 07:27 AM

My current tank has already been through the ringer.
its got a big bit of solder on the bottom from previous owner,
then another hole filled by us,then another holed puttied up.
That is why i am chasing a new one.just always in the back of my mind

Is tmi the best trims out there?
that is manly what i hear people talking about in regards to trims.


barls - March 5th, 2011 at 09:51 AM

for trims talk to brad down at bus and bug. he will look after you.


Joel - March 5th, 2011 at 10:34 AM

Quote:
Originally posted by Arpspasm
Quote:
Originally posted by Joel
Is there actually a difference between LHD and RHD tanks for standard beetles?

Its been years since I've owned one but I seem to remember the bottom of the tank being pretty symmetrical like Superbugs.


I can't remember with 100% certainty but I did have my tank out recently (71 super) and I believe that it had a different shape for where the steering column passes underneath?

Edit: maybe the filler is on the other side for LHD models.


Nah fillers are on the right side regardless.
Super tanks are definately not RHD/LHD specific, they all have the indentation underneath for the steering columns on both sides and I'm pretty sure standards are the same.

Jason what makes you think you need a new tank anyway?
They hardly ever rust, the ones that do are usually on cars that have rusted far worse than the tanks have.


groovy - March 6th, 2011 at 10:16 PM

webby you got my number, i have a tank if you need one


Arpspasm - March 7th, 2011 at 02:44 PM

Quote:
Originally posted by Joel

Nah fillers are on the right side regardless.
Super tanks are definately not RHD/LHD specific, they all have the indentation underneath for the steering columns on both sides and I'm pretty sure standards are the same.



Cool Joel my memory was a little bit smoggy from then. Has anyone fitted one of those aftermarket spun aluminium fuel tanks?
such as

http://www.google.com.au/imgres?imgurl=http://www.chircoestore.com/catalog/im...

I am considering this to tidy up the spagetti of vent hoses and the like, might be the sort of thing Jason is after?