Board Logo

Does anyone have a spare indicator/ignition column unit to suit a "69 type 3? ...
GoldCloverLeaf - February 17th, 2010 at 11:09 AM

I tried this in the parts wanted section but not much luck...

I’m after an indicator stalk and ignition barrel assembly to suit a ’69 squareback as pictured.

I need a complete unit that i can slide onto the steering column and hook up the wiring at the base.

I do not require the actual ignition barrel but ill take it if its already in there... just name your price.

A couple wires pulled out of the indicator based, i attempted to repair it as you can see but to no avail =/

Does anyone have one, or know a breaker in Sydney that might have one?

Thanks,
Michael


1500S - February 17th, 2010 at 03:43 PM

What section isn't working?? Indicator or ignition??

DH


GoldCloverLeaf - February 18th, 2010 at 09:45 AM

The indicator unit... or more specifically the plastic base where the wries attach to. A couple of the wires have pulled out of it and its not really possible to do a proper repair here (i attempted this already).

And its not really viable just replacing the indicator unit, as the wires run under the metal column to a connector at the base, which would be difficult to remove without causing more damage... so yes a really need a complete unit as pictured, with or without the ignition barrel.


GoldCloverLeaf - February 18th, 2010 at 10:40 AM

Ok... not to worry anymore, surprisingly vintage veedub have these new on the shelf (just the indicator unit though), so i will attempt to rewire it and run the wires in a different location.

Cheers
Mike