WHAT fanbelt
RATAFIED - August 21st, 2010 at 08:26 PM
does anyone know the size or a part number of a fanbelt for a type 3 twin carb 1600
1500S - August 21st, 2010 at 08:48 PM
9.5 x 1000 seems to ring a bell.
DH
68AutoBug - August 21st, 2010 at 11:22 PM
Hi
Close Dallas... well OK for Your type 3 311 903 137A
and would probably fit OK... -62-66
but later models had 311 903 137B 67>on
which is 9.5 x 1006mm
or 10mm x 1005mm
from different sellers...
LEE
PS: get them from a VW parts shop.. will be cheaper too...
1500S - August 22nd, 2010 at 12:06 AM
| Quote: |
Originally
posted by 68AutoBug
Hi
Close Dallas... well OK for Your type 3 311 903 137A
and would probably fit OK... -62-66
but later models had 311 903 137B 67>on
which is 9.5 x 1006mm
or 10mm x 1005mm
from different sellers...
LEE
PS: get them from a VW parts shop.. will be cheaper too...
|
One of the Septic Tanks had that size on The Samba Lee.
My Notch is 12 volt but it's too long ago since I put the belt on the engine! 2001 !! Not sure if there was a difference in the crank pulley from
early to late ones. Who knows what I put on it. I had the original from the 6 volt but maybe I didn't use that one as well! I'll have a look on
Sunday and see what belt is on it.
DH
RATAFIED - August 22nd, 2010 at 07:36 PM
thanks heaps again guys