Board Logo

71 Type 3 side window rubber chrome bit (Brisbane)
Franke - October 7th, 2011 at 01:33 PM

Looking for a chrome bit or plastic that goes in the left side back window on a wagon...

need it soon as possible if anyone knows of one or an alternative. trying to get the car sorted for my sisters wedding

cheers

empi - October 7th, 2011 at 04:53 PM

Where are u?

grumble - October 7th, 2011 at 05:47 PM

How about a set of pop outs?

zocstar - October 7th, 2011 at 06:44 PM

Mylar replacement is available. I've got heaps left over. Where you at?

Franke - October 7th, 2011 at 06:58 PM

sorry all, in Brisbane....wouldn't mind a set of pop outs eventually actually... how much would be be talking?

zocstar that'd be sick if shipping wasn't too much bother/expense haha (not sure, never had to ship anything)

dragsters for life - October 8th, 2011 at 07:42 AM

i have a set of fastie popouts ill be moving on once i have pulled the car apart, next couple weeks

Burrelli - October 9th, 2011 at 12:33 PM

Franke

You may have trouble putting pop outs in your 71 Square. I tried years ago with my 73 and that car did not have the parts spot welded into the B pillar for the pop out hinge. Maybe VW made the change in 71 when the vents got put in the rear pillar??? I don't know.

You can put the pop out in but it may require getting the parts for the hinge and welding them into your car.

I had painted my car and thought I had all the parts for the pop outs with new rubbers fitted. When I went to bolt them in I discovered I could not:mad:

Something to check before you start.

Franke - October 9th, 2011 at 04:23 PM

cheers mate, will have a look!

grumble - October 9th, 2011 at 06:18 PM

Quote:
Originally posted by Burrelli
Franke

You may have trouble putting pop outs in your 71 Square. I tried years ago with my 73 and that car did not have the parts spot welded into the B pillar for the pop out hinge. Maybe VW made the change in 71 when the vents got put in the rear pillar??? I don't know.

You can put the pop out in but it may require getting the parts for the hinge and welding them into your car.

I had painted my car and thought I had all the parts for the pop outs with new rubbers fitted. When I went to bolt them in I discovered I could not:mad:

Something to check before you start.
If the bits are there and you are interested give me a PM

stevedel - October 9th, 2011 at 11:11 PM

Quote:
Originally posted by dragsters for life
i have a set of fastie popouts ill be moving on once i have pulled the car apart, next couple weeks


Am keen to track down parts for the popouts for my Fastie. Need the pivot hinge clips which fit halfway down the rubbers which allow the glass to flex. Any ideas?

Franke - November 13th, 2011 at 09:39 PM

i got the windows out the other day and noticed i have 2 sets of holes spaced out as if for hinges on the front 2 windows in the back... would this be where the pop outs go?

Burrelli - November 13th, 2011 at 10:33 PM

You will be missing some plates for the popout hinge and nothing to screw the popout latch into the body.

Here is a link

http://www.thesamba.com/vw/forum/viewtopic.php?t=77294&highlight=popout+h...