Board Logo

Syngear Pushrod Tube - One Piece - Installing without Head Removal
Syngear - October 13th, 2016 at 01:25 AM

- absolutely leak proof due to one piece configuration
- no cylinder head removal (only heat exchanger removal)
- easy and fast installation without tools by preloadable spring
- preparation demo: http://www.youtube.com/watch?v=nHiACgrlmkI 
- installation demo: http://www.youtube.com/watch?v=P0yiJFkYRuM 
- made of extruded aluminium with black anodised coating
- stone impact resistant
- four lengths: 30 PS, Porsche 356, 1200 ccm, 1300/1500/1600 ccm
- only with standard valve rockers
- pressure spring made of stainless steel
- gasket made of black silicone rubber resistant to extreme environments and temperatures
- German patent
- made in Germany
- final price for 8 tubes with gaskets, springs and washers including shipping: 94 AUD (for 30 PS and Porsche 356 113 AUD)
- 2 sets already sold to customer in New South Wales
- http://www.syngear.co.uk 

Aircooled greetings

Ludwig Dierl
Syngear Engineering and Master of Rocket Science


6621104 - October 13th, 2016 at 06:01 PM

If that photo is of a cold engine the thermostat is rooted! OTher wise looks good, any long term reviews?


Syngear - October 13th, 2016 at 07:37 PM

Hello 6621104,

the Syngear Pushrod Tubes are manufactured since 2013. Most of them are sold in Germany, but also some sets to USA and other countries.
As the customers in the aircooled community have a very good network a bad product would have no chance to be sold.

All parts are produced in Germany. The competitive price can only be assured because we sell the product directly form the production line.

For further information you are welcome.

Aircooled Greetings

Ludwig Dierl
Syngear Engineering


Syngear - October 5th, 2018 at 03:10 AM

- innovative pushrod tube for type 1 engines and for Porsche 356 / 912 engines
- absolutely leak proof due to one piece configuration
- no cylinder head removal
- easy and fast installation without tools by preloadable spring
- preparation demo: http://www.youtube.com/watch?v=nHiACgrlmkI 
- installation demo: http://www.youtube.com/watch?v=P0yiJFkYRuM 
- made of extruded aluminium with black anodised coating (on first image without coating)
- stone impact resistant
- four lengths: 30 PS, Porsche 356 / 912, 1200 ccm, 1300/1500/1600 ccm
- only with standard valve rockers (for non standard valve rockers please contact me)
- pressure spring made of stainless steel
- gasket made of black silicone rubber resistant to extreme environments and temperatures
- German patent
- made in Germany
- final price for 8 tubes with gaskets, springs and washers including shipping: 126 AUD (for 30 PS and Porsche 356 see online shop)
- http://www.syngear.co.uk 


Syngear - October 16th, 2019 at 07:06 PM

- innovative pushrod tubes for type 1 engines
- absolutely leak proof due to one piece configuration
- no cylinder head removal
- easy and fast installation without tools by preloadable spring
- preparation demo: http://www.youtube.com/watch?v=nHiACgrlmkI 
- installation demo: http://www.youtube.com/watch?v=P0yiJFkYRuM 
- made of extruded aluminium with black anodised coating (on engine image without coating)
- stone impact resistant
- five lengths: 30 PS, Porsche 356/912, 1200 ccm, 1300/1500/1600 ccm, CT Engine/Water Boxer
- for standard valve rockers and for non standard valve rockers
- pressure spring made of stainless steel
- gasket made of black silicone rubber resistant to extreme environments and temperatures
- made in Germany
- final price for 8 tubes with gaskets, springs and washers including shipping: 178 AUD (for 30 PS, Porsche 356/912, CT Engine see online shop)
- https://www.syngear.co.uk 

Aircooled Greetings

Ludwig Dierl
Syngear Engineering