Aussieveedubbers - Powered by GaiaBB

Balljoint Beam trailing arm stops/limiters.

Craig Torrens - October 16th, 2003 at 08:42 PM

I have seen several offroad beetles and buggies fitted with bump/rebound stops on the front trailing arms. This has been a welded stop on the beam and a corresponding welded "thingy"on the trailing arm. Wes, I think you may have this ???

Can you buy this over the counter or can someone make me one !

daz67 - October 16th, 2003 at 09:02 PM

Craig,

Get yourself a copy of this and then you can make them yourself, or at least show someone what is required and have them make them for you.

http://www.manxclub.org/images/ManxManiaCovers/ManxmainaIIICover.jpg

Cheers

Craig Torrens - October 16th, 2003 at 09:19 PM

ummmmm so how do I get a copy !

daz67 - October 16th, 2003 at 09:26 PM

Click on my signature line, then join the club.

You will get a new magazine every Qtr with heaps of usefull tips, like the one for the front end setup.

Craig Torrens - October 16th, 2003 at 10:54 PM

will do, I thought I had to have a manx !

once I join can I get a copy

Craig Torrens - November 16th, 2003 at 08:17 PM

Any chance of photo's of front ends with this !! I'm doing the front beam this week and this would help.

daz67 - November 19th, 2003 at 08:14 PM

Send an e-mail, Maybe they can send some pics when you join.

Brad - November 19th, 2003 at 11:06 PM

Now now dazza be nice to the buggy owner

Cam - November 20th, 2003 at 03:46 PM

Is this going on your hillcimb car, Craig? If so what or of advantages are you expecing?

Craig Torrens - November 20th, 2003 at 09:34 PM

Not for the Hillclimb car Cam !! Its 1 of six VW powered toys in the collection

This is for my current project, an offroad J&S buggy. I just want to set it up right the first time.

Cam - November 20th, 2003 at 10:48 PM

You freakin what? 6? :o lol.

Sounds cool dude! Have been contemplating getting a buggy, running IRS/balljoint, 4 wheel disks, down low with a close ratio box and nippy T1 motor.

What other toys have you got?