Board Logo

can someone identify these adjusters
pickstock - July 4th, 2011 at 12:25 PM

i bought these alongg with the front beam to go with them off a member of the board.
i will pm him but can someone identify the brand and cost of how much for another set?

reason is i got it all home and thought why bother going with the same size, why not widen the beam say 4-6 inches (not going to go over board ie 8-10) and i dont want to mix and match adjustors
cheers
http://thumbnails42.imagebam.com/13910/88308a139098381.jpg


pickstock - July 4th, 2011 at 12:29 PM

forgot to mention
the label says
'king & link front torsion adjuster'
acc-c10-4031
carousel20


nils - July 4th, 2011 at 05:31 PM

They look like the generic adjusters you would buy from any vw shop, couldn't tell you the brand, but if you bought a set over the counter 95% chance you get those


68AutoBug - July 4th, 2011 at 09:02 PM

Quote:
Originally posted by pickstock
i bought these alongg with the front beam to go with them off a member of the board.
i will pm him but can someone identify the brand and cost of how much for another set?

reason is i got it all home and thought why bother going with the same size, why not widen the beam say 4-6 inches (not going to go over board ie 8-10) and i dont want to mix and match adjustors
cheers
http://thumbnails42.imagebam.com/13910/88308a139098381.jpg


standard adjusters...
c10-403 sounds like a CIP1 part number...

but that is the type you will get from most vw parts shops..
whether they will be the same ????????????

Lee

could be empi [made in china/taiwan etc??? brasil/mexico??

Lee


pickstock - July 4th, 2011 at 09:10 PM

ive been told they are sway aways by the american forum

even so if i end up using 4 and widening the beam i will use these 2 top or bottom and the other set vice versa
so im not turning left or right all the time :crazy:


68AutoBug - July 5th, 2011 at 12:23 AM

sway aways is a strange name... lol

but they are the MOST common type of adjusters...

so, You are going to cut the torsion leaves in Half???

and use two on each torsion bar?? top & bottom..

never ever heard of anyone doing that

LEE

is this an offroad Buggy???


pickstock - July 5th, 2011 at 09:34 AM

sorry swayaway

thats what most people do when widening the beam, they cut usually 1/3 off 2 sets of leaves