hi
Does anybody here know of someone who makes and sells a one piece fiberglass frontend to suit a type3 notch or anyone who could make one from
scratch?
cheers
sean
Vintage has one available for a Beetle.
Never seen one for a Type 3
You could do it yourself.
You need a steel front end to use as a plug. fill all the gaps up with clay. Then you paint on a releasing agent. then you glass your own mould using
the front of the other car. This mould is then glassed into and you pop the f/glass front back out of it.
there's a guy in england who did recently with a ghia. Here is the site.
http://www.ricola.co.uk/ghia_body.htm
email him for tips. he a really nice guy.
Quote: |
Try Vforce...........Richards a fibreglass repairer.