Board Logo

WTD - Beetle 1968-1979 Window regulators
psimitar - August 25th, 2022 at 05:14 PM

Hello all,

Just wondering if anyone has a pair of the above window regulators that use the worm drive cable going spare?

In mainly good working order. If the plastic channel guides are worn then could maybe still use them if I can fabricate some nylon replacements.

Anyhoo, just seeing what's out there. Melbourne area would be easier as the volumetric postage will probably be quite pricey.

Cheers,
Mike
Dandenong North
Melbourne
VIC 3175

grumble - August 26th, 2022 at 05:21 PM

Mike I should have a pair, see how you go close to home and if no success let me know.
Cheers
Les

psimitar - August 27th, 2022 at 06:54 PM

Quote:
Originally posted by grumble
Mike I should have a pair, see how you go close to home and if no success let me know.
Cheers
Les


Cheers Les. If not too much trouble would you be able to measure the height, width and depth as if they were placed in a box? Then I can figure out how much AusPost would want out of my piggy bank if I can't find locally :tu:

karmannghia60 - August 30th, 2022 at 03:52 PM

I might have a pair for you Mike incase you can't get Les'
I am in East Kew

karmannghia60 - August 30th, 2022 at 03:57 PM

Is this what you are looking for?
https://i.postimg.cc/K8Ky40Z1/20220830-155549.jpg

psimitar - September 3rd, 2022 at 10:17 AM

Quote:
Originally posted by karmannghia60
Is this what you are looking for?



Thanks for asking. These are the style of regulator I'm after. Cheers :)

Frankston W - September 4th, 2022 at 10:40 AM

Quote:
Originally posted by karmannghia60
Is this what you are looking for?
https://i.postimg.cc/K8Ky40Z1/20220830-155549.jpg

karmannghia60 - September 5th, 2022 at 12:00 PM

Hi Frankston W, yes I am. I will PM you so we don't hijack psimitar's post

Frankston W - September 5th, 2022 at 06:40 PM

5th post. So I hope I can pm you back

Frankston W - September 5th, 2022 at 11:15 PM

:smilegrin:

Frankston W - September 5th, 2022 at 11:22 PM

Trying to pm you karmannghia60

grumble - September 19th, 2022 at 04:52 PM

Mike I sent another message but not sure if it went through, the mechanisms are the worm and gear type not the crank and lever type as shown in karmanngkia60's post. If you PM your mobile No I will take another couple of photos and send them direct.