Board Logo

kombi mag nuts wtd
kombi_kid - October 11th, 2004 at 04:10 PM

rhys vanderkly
sawtell nsw 2452
hey guys
am chasing 20 kombi mag nuts anyone have some??
cheers
rhys

vwtyp2 - October 11th, 2004 at 07:55 PM

hey, they're nothing special.
I was missing the ones for my BRM's, and just got some from my friendly local wheel and tyre outlet.

just have to get the right thread, and take a rim in with you so they can get the right i.d. of the bolt hole.

kombi_kid - October 11th, 2004 at 10:22 PM

have tried all wheels and tyre shops and they say its not worth it at around $7 a nut plus freight was just wondering if anyone had any lying around!
cheers
rhys

Desert Bug - October 11th, 2004 at 10:59 PM

G'day Rhys,

If the nuts you need are tapered (60 degree) you've could try Mr. Lugnuts or use 100 Series Landcruiser wheelnuts. I got mine through a Hot Rod shop for $2 ea.

Cheers, Ian.

kombi_kid - October 12th, 2004 at 07:53 AM

these are the flat type i have tappered ones but they just dont seem to pull it in right!
cheers
rhys

Brad - October 12th, 2004 at 01:40 PM

the flat type with the shoulder like used on performance mags ?

72TWINCAB - October 12th, 2004 at 03:19 PM

I've got some. Will take a picture of one when I get home if you want. I picked up at a swap meet for $20. You can have them for $20 plus postage if you want.

kombi_kid - October 12th, 2004 at 07:35 PM

yer the performance style brad
that would be great 72 twincab!!
cheers
rhys

72TWINCAB - October 13th, 2004 at 09:37 PM

here's the picts you wanted.

72TWINCAB - October 13th, 2004 at 09:38 PM

a diferrent angle

[Edited on 13-10-2004 by 72TWINCAB]

72TWINCAB - October 13th, 2004 at 09:39 PM

:D

kombi_kid - October 13th, 2004 at 10:16 PM

if they fit onto a kombi thread there sold!!!
cheers
rhys
p.s. u got u2u