| [ Total Views: 1064 | Total Replies: 10 | Thread Id: 100520 ] |
|
|
 pfillery
Insano Dub Head
Posts: 734
Threads: 160
Registered: December 30th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 18th, 2013 at 12:45 PM |
|
|
Painting engine tinware
Looking at the pros and cons of painting my tin as opposed to replacing it.
Sme bits are quite cheap to buy new so wondered is it worth cleaning, degreasing, sanding and painting old tinware?
Also what sort of paint is best if I decide to go this way (which I will do with some) - does it need a high temp paint or is a good epoxy all that is
required?
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on January 18th, 2013 at 01:00 PM |
|
|
Hi
I use White Knight satin black, reasonably durable. Genuine tin usually fits better than new replacements.
Steve
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on January 18th, 2013 at 02:49 PM |
|
|
| Quote: | Originally
posted by pfillery
Looking at the pros and cons of painting my tin as opposed to replacing it.
Sme bits are quite cheap to buy new so wondered is it worth cleaning, degreasing, sanding and painting old tinware?
Also what sort of paint is best if I decide to go this way (which I will do with some) - does it need a high temp paint or is a good epoxy all that is
required?
|
Hi
I use white knight undercoat and Kilrust gloss paint
these tend to stick together really good...
I always leave the undercoat on for at least one day or more in the sun... lol
I have used High Temp paint but its not glossy..
but none of them usually off.. lol
it IS worth it to do the original tinware..
the new ones don't fit as good... and are usually thinner metal... many people have tried them then went back to the originals.. because of the
poor fit..
I usually go back to bare metal...
but its not probably neccesary..
cheers
LEE
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Paulc1964au
Custom Title Time!
Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 18th, 2013 at 03:25 PM |
|
|
ok have done some research and what I have found is if you have original German tinware then you cant get any better than that.
For my new engine build I am using my existing tinware and having it powder coated
|
|
|
snitz
Wolfsburg Wizard
Posts: 605
Threads: 37
Registered: September 28th, 2008
Member Is Offline
Location: Adelaide.. the defect and taser state..
Theme: UltimaBB Psyche Red
Mood: "Bug"gered
|
| posted on January 18th, 2013 at 04:08 PM |
|
|
If your using all your original tinware definately powdercoat..cheaper than sanding,prepping and painting in 2pak.Very durable.Make sure they block
any threaded inserts or areas where you put in clips etc..in the tinware as it will fill up with powdercoat or just re-tap after powdercoating.
|
|
|
pfillery
Insano Dub Head
Posts: 734
Threads: 160
Registered: December 30th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 19th, 2013 at 09:53 AM |
|
|
So obviously doesn't have to be high temp paint as such? You can get a pretty good VHT paint which is nice and glossy so might go with that. My fan
housing is pretty good, just things like the underside tin and heat exchanger surrounds need a hit but would probably use muffler paint for the
exchangers.
Powder coat is considerably more pricey from what I've looked into, plus the downtime of a couple of weeks.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on January 20th, 2013 at 01:34 AM |
|
|
take a look at my resto thread but I cleaned up my original tin and then used 3M high temp paint from Supercheap.
Came out looking like original Matt Satin Black and seems pretty hard wearing so far 
madness is in the eye of the beholder  |
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on January 20th, 2013 at 09:00 AM |
|
|
Forget the aftermarket tin, it rattles, cracks and fits poorly, good condition OEM tin wins hands down everytime.
I've run colourcoded detailed engine bays for about 15 years now and have always found if you put the effort into prep and use good quality paint it
holds up well and looks awesome.
In saying that though with the last VW engine I built I took the plunge and had some original tin powder coated gloss white.
It wasn't as costly as I would have though ($120 5 years ago) and I was really impressed with how durable it was, very resistant to chipping and
scratching and oil stains polished straight off.
Well worth it if you plan on keeping the car.
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on January 20th, 2013 at 09:04 AM |
|
|
| Quote: | Originally
posted by Joel
Forget the aftermarket tin, it rattles, cracks and fits poorly, good condition OEM tin wins hands down everytime.
|
x10
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
pfillery
Insano Dub Head
Posts: 734
Threads: 160
Registered: December 30th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 21st, 2013 at 07:05 AM |
|
|
Powder coat is a lot more than that now. I was working for a place making light fittings etc and we had a pretty good deal with powdercoaters and the
prices were high. Around $80 to do a wheel rim. It used to be $30 but environmental penalties and other costs have lifted it. Not as bad as
galvanising but getting there. They wanted $200 to 2pak a steering wheel and that was not counting prep.
The other obvious problem is downtime. Can't drive with engine tin off.
Thanks for the advice, I think I'll go with one of the good paints and use my original tin. Just got to get the time to do it now.
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on January 21st, 2013 at 08:02 AM |
|
|
If you really want to use a VHT paint that requires curing/baking then make sure you follow the instuctions and bake it in an oven to avoid it failing
completely
I just use a rattle can, killrust, white knight etc
|
|
|
