A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on February 24th, 2013 at 11:08 AM
Be aware, if you use ratio rockers you will require shorter pushrods.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
SuperOwen
Fahrvergnugen
Posts: 868
Threads: 67
Registered: January 18th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on February 24th, 2013 at 10:27 PM
As a side note if your handy with a lathe you can shorten stock push rods for use with 1.4 rockers. You just undercut where the end is pressed in then
just hammer it home again.
gazzac
Seriously Crusin Dubber
Posts: 122
Threads: 42
Registered: December 28th, 2009
Member Is Offline
Location: Surrey Downs Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
