| [ Total Views: 599 | Total Replies: 14 | Thread Id: 100983 ] |
|
|
 Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 23rd, 2013 at 07:03 AM |
|
|
Fitting Gearbox Banana Mounts
Hi guys
Somebody please set my mind at ease.
Whilst the engine is out of the car I decided to replace the banana mounts on the gearbox as they looked in pretty bad shape. I bought some heavy duty
kombi mounts from VVDS and installed them.
Apart from having some drama removing the support bracket the installation went fine. I have a few questions:
1. Does it matter which way the mounts are installed? The 2 "bumps" facing back or should they be facing the other way?
2. The curved steel backing plate of the mounts do not still 100% flush with the support bracket...is this ok?
3. I had quite a time tightening the large support bracket bolts back up and was worried that due to my "hulK" like strength that they would
break....any need for me to worry?
4. Also, should there be split washers under the nuts on the banana mounts as there are only flat washers under all nuts?
I have posted a picture so that you can see what I mean.
Thanks guys
Regards
Greg
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 23rd, 2013 at 07:09 AM |
|
|
all of the above is good dosent matter which way the bumps are
only flat washers
|
|
|
Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 23rd, 2013 at 08:47 AM |
|
|
Thanks mate
The paranoia was starting to set in 
Regards
Greg
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on February 23rd, 2013 at 09:13 AM |
|
|
| Quote: | Originally
posted by vw54only flat washers
|
Shouldn't they be wave washers?
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 23rd, 2013 at 11:02 AM |
|
|
wave flat same thing
but yes yr right they should have slight wave for locking purposes
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on February 23rd, 2013 at 11:15 AM |
|
|
Do we need to get padantic here????
For the hell of the factory fitment, the holes in the support bracket are slotted and originally had 2x flat washers (not wavey lock washers) with a
spring washer for security. The bolts into the bell housing have wave washers only.
And I don't think you'll break the big bolts, should be nice and tight.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 23rd, 2013 at 11:32 AM |
|
|
hmmm, so perhaps I need to double check to see if I I have 4 flat washers for attachment of the mount to the support bracket and 4 wavey washers for
attachment of the mount to the bell housing...
I assume that I can get some wavey washers from Repco or Auto 1 stores???
Regards
Greg
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on February 23rd, 2013 at 11:40 AM |
|
|
The thin wavey washers are German only I believe. Vintage will have them by the hundred (I do), Wurth are the suppliers and you may find a local
workshop that use thier gear, but really not worth loosing any sleep over it. I was just setting the record straight for future reference. The best
part using wavey's inside the trans is thier low profile and locking without gauging into the alloy like a spring washer. Happy to post you some if
you really want.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 23rd, 2013 at 11:42 AM |
|
|
Hi Matt
Thanks for the offer.
I'll check to see if in my haste I inadvertently used the wrong washers in the wrong spots....
I'll let you know.
Regards
Greg
|
|
|
Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 23rd, 2013 at 12:40 PM |
|
|
Hi Matt
I just checked the washers and they seem to be on the "thinish" side of things so they may be wavey washers that have flattened out?
Regards
Greg
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on February 23rd, 2013 at 08:15 PM |
|
|
All 8 washers should be wave washers. (VW call them spring washers)
Part# N 012 241 10 Washer B8x15x0.8
These should be available from VVDS or VW/Audi dealers.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on February 23rd, 2013 at 10:48 PM |
|
|
gearbox mountings
I always use flat washers and nyloc nuts...
all new...
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 24th, 2013 at 03:43 PM |
|
|
Nylocs sound good
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on February 24th, 2013 at 06:13 PM |
|
|
What you've done should be fine. If you are worried, put a bit of Locktite on the threads but I've never seen them come loose.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 24th, 2013 at 06:48 PM |
|
|
Thanks guys
|
|
|
